Cisco-Eagle Logo
Conveyors > Belt Conveyors > Model TR Slider Bed > Troughed Bed Conveyor, Model TR - 8" OAW, 21' long

Troughed Bed Conveyor, Model TR - 8" OAW, 21' long

Built-in guardrail ideal for overhead use

Troughed Bed Conveyor, Model TR - 8" OAW, 21' long
View Larger Image

SKU: 30.40.08.21

Manufacturer: Hytrol

Slider belt conveyors are one of the most commonly used belt conveyors in use due to the number of diverse applications for which they can be used. Built-in guardrail makes this conveyor the solution of choice if moving materials overhead by preventing products from falling and possibly causing damage or personnel injury. Select among the options below to customize this slider bed conveyor to fit your application.

image of Ultimate140 conveyor belting

  • Standard on most horizontal slider bed and roller bed conveyors

  • Good for general purpose package handling

  • More oil resistant, quieter, less roller build up, and withstand higher temperatures.

image of Polymate100 conveyor belting

  • Good oil, fat and grease resistance. Easily cleaned

  • May be used in general food applications such as canning or packing lines

  • Meets FDA requirements and USDA acceptance

image of trackmate 447 conveyor belting

  • Standard on most incline and decline conveyors

  • PVC Impression on top surface for additional gripping properties

  • Contact us for specific performance information

image of trackmate 533 conveyor belting

  • Good for applications where belt tracking may be difficult

  • Good resistance against abrasion and abuse

  • Contact us for specific performance information

drawing of a conveyor end drive

  • The end drive is a very common powertrain used on belt conveyors

  • Includes motor, reducer, pulley, and guard

  • Standard for most applications

image of a conveyor center drive

  • Common powertrain used on belt conveyors or live roller conveyors

  • Well suited longer lengths where higher total load capacity is required

  • Required on most applications where the conveyors will be operated in both directions (reversing)

The standard speed for most unit handling conveyors is 65 FPM (Feet Per Minute).  This is the average speed a person walks when carrying a 50 lb. box.  The service life of a conveyor running at a higher speed may be shortened considerably.

For more information on conveyor speeds visit our Calculating Conveyor Speed page.

Horsepower

Select a 1 HP motor if you are moving product over the standard 65 feet per minute.

Motor Types

  • Totally Enclosed: A motor enclosure, which prevents free exchange of air between the inside and the outside of the enclosure but is not airtight. This is the standard motor on many conveyors
  • Totally Enclosed Fan-Cooled: Provides for exterior cooling by means of a fan integral with the motor, but external to the enclosed parts.
  • Totally Enclosed Non-Ventilated: Has no provisions for external cooling of the enclosed parts. The motor is cooled by heat radiation from the exterior surfaces to the surrounding atmosphere.
  • Energy Efficient: Energy efficiency motors are specially designed to be more effective at converting electrical input to mechanical output.

floor supports for hytrol conveyor

  • Support heights listed are measured to top of conveyor bed or roller
  • Supports are required on the discharge end, infeed end, and all section joints
  • All floor supports listed are adjustable and mounting holes are pre-drilled
MS-04-08
MS-05-08
MS-06-08
MS-07-08
MS-08-08

$3,629.00

$3,867.20
Inquire

Options Selected

  • Belt Type : Black Ultimate 140 BBS (Standard)
  • Drive : End Drive (Standard)
  • Speed : 65 FPM (Standard)
  • Motor : 1/2 HP. 460 Volt - 3 Ph. Totally Enclosed (Standard)
  • Floor Supports : 27-3/4 in. to 39-3/4 in.(top of belt)

Width

Model TR Belt conveyor has three width measurements to be aware of: overall width (or bed width), between rail width, and belt width.  Overall width is the width of the frame. The built-in guardrail extends a 1/2" inward on either side of the frame making the between rail width 1" smaller than the overall width.  Similarly, there is a 1/2" gap between the belt and the guardrail to prevent friction making the belt width 1" smaller than the between rail width.  Keep this in mind when determining what width of conveyor you need to meet your package requirements.

front view of model TR conveyor

Length & Supports

Conveyor is available in 5 foot and 10 foot lengths for straight sections.  The length of the conveyor along with the number of supports underneath greatly determine its load capacity.  In most applications, supports should be placed in either 5 or 10 feet intervals depending on the weight of the product you are conveying.  By installing a support every 5 feet, capacity of that section increases greatly; keep in mind though that no matter how close together you place supports, the roller axles themselves also have a capacity that should not be exceeded.

Shipping

Conveyor is crated and shipped in 5ft and 10ft sections, depending on the overall length of the conveyor, and will need to be bolted together on-site.  The drive assembly, reducer, and motor will shipped attached to one of these sections.  Because these sections are unattached for shipping, the conveyor belt itself will also have to be attached onsite.  Please note that this conveyor DOES NOT include electrical components or switches.

  • Lead Time: 2 weeks + transit time
  • Belt Width: 6"
  • Overall Width: 8"
  • Bed Length: 20'
  • Overall Length: 21'
  • Belt: Ultimate 140 BBS–Nitrile
  • Frame: 4 in. deep x 12 ga. formed steel slider bed- powder painted. Standard 5 ft. & 10 ft. long sections bolt together with splice plates
  • End Drive: Located on discharge end of conveyor, chain guard on left hand side
  • Drive Pulley: 4 in. dia. with 1 in. dia. shaft at bearings or 8 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned and fully lagged
  • Tail Pulley: 4 in. dia. with 1 in. dia. shaft at bearings, machine crowned
  • Snub Idler: Adjustable 2-1/8 in. dia. for 4 in. pulley–2-1/2 in. dia. for 8 in. pulley. Pre-lubricated ball bearings. Guards included
  • Return Idler: Adjustable 1.9 in. dia. pre-lubricated ball bearings
  • Take-Up: Take-ups at tail pulley. Provides 4 in. of belt take-up
  • Speed Reduction: Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley
  • Motor: 1/2 HP–208/230/460V/575–3 Ph.–60 Hz. Totally Enclosed C-Face
  • Supports: MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor
  • Nip Point Guard: Prevents a pinch-point to protect users and products from injury or damage
  • Weight: 464.2 lbs. ea.

drawing of model TR Conveyor

© Cisco-Eagle 2024. All Rights Reserved

View Quote

Shopping Cart: 0 Items

Your shopping cart is currently empty.
Discounts:
Total:
View cart

Your Quote: 0 Items

Your wish list is currently empty.
Build Your Quote Add to Cart
Total:
Loading...