Width
Belt conveyor width is measured in two ways; overall width (or bed width) and belt width. Overall width includes the width of the frame, which is 2" on either side of the belt. This means that the belt width would be 4" less than the overall width of the conveyor. Keep this in mind when determining what width of conveyor you need to meet your package requirements.

Shipping
Conveyor is crated and shipped with motor and reducer installed.Please note that this conveyor DOES NOT include electrical components or switches.
-
Lead Time: 2 weeks + transit time
- Belt Width: 18"
- Overall Width: 22"
- Overall Length: 5'
- Belt: 3-ply black Nitrile with 1-1/2" high molded cleats on 12" centers; clipper lacing
- Bed: 6-5/8" deep x 12 gauge powder painted steel slider bed. 3-1/2" high vertical sides with square edge guardrail
- Portable Base Support: Tubular steel support mounted on 4" dia. steel wheels. Supports are adjustable at the top and bottom to control height and can be locked in place with a lever
- Drive Pulley: 4 in. dia. with 1 in. dia. shaft at bearings, machine crowned and fully lagged
- Overhead End Drive: Motor reducer unit mounted 9-1/2" above belt. Chain guard on right hand side
- Belt Return: 4" dia. with 1" dia. shaft at bearings, machine crowned
- Take-Up: 4" of belt take-up provided at tail pulley. Ball bearings are sealed, pre-lubricated and self-aligning
- Speed Reduction: Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley
- Motor: 1/2 HP–208/230/460V/575–3 Ph.–60 Hz. Totally Enclosed C-Face
- Belt Speed: Constant 65 FPM
- Capacity: 300 pounds total distributed load
- Weight: 670.5 lbs. ea.