Modular In-Plant Office - 12' L x 16' W x 8' H, W/ 3 Walls

• Walls:  3 Walls
• Dimensions:  12' L x 16' W x 8' H
• Light Fixtures:  4
• Outlets:  3
• Cornice Mold:  Anodized aluminum in either anodized or painted finish
• Dust Cover:  22-gauge corrugated steel, 1-1/2" deep, painted and cut to length
• Loading Bearing Roof Beams:  Required for units over 12' in length
• Light Fixture:  2'W x 4'L recessed fluorescent light fixtures fit into the ceiling grid system and circuit breaker boxes. Requires four lamps and includes acrylic lens (lamps not included).
• Acoustical Lay-in Ceiling:  Class A non-combustible white fissured mineral board
• Climate Control:  Can be ordered with factory-installed cutout for mounted HVAC or AC units (also available)
• Exhaust Fan:  Optional
• Standard Ceiling Tile Dimensions:  2' x 4'
• Fire & Sound Panels:  3" thick with insulating polystyrene core with 1/2" vinyl gypsum surface
• Floor Track:  Galvanized steel channels included to hold wall panels in place
• Electrical Package:  Duplex outlets, wall switch, circuit breaker box and handy boxes and conduit included
• Door:  20 gauge 3070 (36" x 84") x 1-3/4" insulated steel with 1/4" clear tempered safety glass window
• Base:  Screw-on type, brown vinyl, interior and exterior
• Wiring Studs:  Included
• Wall Colors:  Available in gray or white
• Ceiling Height:  Hangs approximately 6" from dust cover
• Standard Door Options:  Door closers, aluminum thresholds, louvers and kick plates
• Door Installation:  Pre-hung in an 18 gauge steel door frame and factory installed in a wall panel with 4-1/2" hinges
• Weight: 2458.0 lbs. ea.

Click on the thumbnails to see a larger image below.

190

Loading...

3-Sided in-plant office uses one existing wall

3-Side offices fit against a single building wall, providing a secure area utilizing one building wall and three panel walls. Your facility wall must be able to accommodate panel walls and ceiling in order to utilize a 3-sided modular office. Panel walls and ceiling will work with most flat facility walls as they are to be tied into with anchored wall starters and angled roof supports.

Color-coordinated panels, studs, doors and trim bring a professional "front office" finish that helps project a positive image to employees, customers, and other visitors.

Installation is fast and easy. Complete layout drawings and step-by-step assembly instructions are included.

Anatomy of a Modular Office:

1. Doors -Standard units are available with either 3070 - 20 gauge steel doors or 6070 double door assemblies. The drawing shows a 3070 with optional glazing (1/4" clear tempered safety glass).
2. Cornice Mold - Provides handsome finished appearance.
3. Fixed Windows (optional) - Windows are either 4' or 2' in width and 3' tall with 1/4" clear tempered safety glass. Sliding windows and other sizes are also available.
4. Corrugated Steel Dust Cover - Painted and cut to length. Supported by the framing system and lies within the cornice mold or top cap of the office for a clean and professional look.
5. Light Fixture - 2'W x 4'L recessed fluorescent light fixtures fit nicely into the ceiling grid system and circuit breaker boxes.
6. Acoustical Lay-in Ceiling
7. Exhaust Fan (optional) - Can be included with any office and is based on the application of the room as well as the number of expected occupants.
8. Climate Control Unit (optional)
9. Fire & Sound Panels
10. Steel Floor Track
11. Corner Post
12. Duplex Receptacle
13. Wiring Studs - Are part of all framing systems and permit the installation of electrical service vertically and accept standard electrical boxes. Studs allow all outlet boxes, switches, wiring, and conduit to fit neatly into the framing system with removable cover plates for wiring access. Complete modular wiring systems are also available.
14. Brown Vinyl Base - Easily removable with no exposed screws or fasteners.
15. Standard Thermal Panels - Feature 1/8" thick vinyl hardboard bonded to an insulating polystyrene core.

Framing

Two piece stud sections physically connect back-to-back providing a strong load bearing system that allows for easy relocation of individual wall panels without disturbing adjacent panels or ceiling tile. The unique double layer steel studs provide more strength at a lower cost than single layer studs and the rolled ends reduce tear risks during assembly. Wiring capabilities on both sides of the stud without affecting the structural integrity of the stud. Removable "snap-in" cover plates allow for easy inspection of raceways. Electrical or communication lines can be added at any time, during or after installation without purchasing additional stud components or cutting into them.

Standard and Optional Colors

Standard colors are gray and white. Optional colors can be ordered. All exposed trim and framing finished in baked enamel. With steel panel option, trim and framing can match wall panel color choice for a smooth monochromatic finish.

Gray

White

For a customized configuration, contact Customer Service.

• 8' x 12' Modular Offices (281 KB PDF, opens new window)
• Modular Wall System (97 KB PDF, opens new window)
• Roof and Ceiling Options (80 KB PDF, opens new window)
• Installation Instructions (756 KB PDF, opens new window)
• Wall Starter & Dust Cover Support Angle Drawing  (34 KB PDF, opens new window)

Lead Time: 5 Days + transit time

Contact Cisco-Eagle to get a Shipping Rate for this item