SKU: HRSG-3
Manufacturer: WireCrafters
POSTS AND RAILS -constructed of 2" square 14 gauge steel tubing. Two formed 14 gauge steel inserts with 1/8" threaded flat bar shall be provided to connect each rail section to post. All parts shall be factory drilled to accept 3/8" mounting hardware.
FLOOR SOCKETS shall consist of 4" x 4" x 1/4" base plate punched with four 7/16" round mounting holes, with a single formed 11 gauge steel mounting channel securely welded into place. One floor socket shall be provided for each post. Corner floor sockets shall have the mounting channel welded in the corner.
KICKPLATE - shall be 4" in height, constructed of 16 gauge sheet steel, formed at ninety degrees along the top edge and punched with slotted holes on each end for mounting to upright posts. Ends of adjacent kickplates overlap where mounted to post.
FINISH - All non-plated parts are powder coated.
Rail sections combine with 6" run post connectors or 4" corner/end posts to lay out on 8', 4', or 2' centers. The rails bolt to posts with factory threaded inserts and the posts bolt to floor sockets for floor anchoring. Hinged door easily connects to the post by bolting together.
For configuration assistance please contact Cisco-Eagle customer service.
Lead Time: 2 Weeks + transit time
Get Shipping Estimate