SKU: ALCO-452921
Manufacturer: Aleco
Studded mounting hardware is recommended for the heaviest strip applications such as 16" wide or strips which are particularly long in length. All mounting studs have been welded to ensure a quick and easy installation. Simply install the mounting plate to either lintel or side wall, add strips, and install face plate. All mounting holes are pre-drilled and all fasteners except those needed to attach mounting hardware to existing building material are supplied. Studded mounting systems are available in your choice of aluminum or galvanized steel. This innovative system, consists of angle and face plates. It allows the strip door to be mounted in either the lintel (inside frame, under-header) or side wall (header) position - see below.
Installation: Each PVC strip is secured between the vertical side of the angle and one foot face plate sections. Worn or damaged strips may be easily replaced by simply removing the necessary number of face plate sections, replacing the appropriate strips and reattaching the face plates. Offset angle and sliding bracket kits are also available - contact us for assistance.
Overlap is measured at the point strips attach to the mounting hardware. This door features 12" strips. They overlap each other by 2" on each side. Overlap at the floor may be less due to the curve across the face of the material. The greater the overlap, the more restricted the flow of air through the door. 12" strips are used in medium duty to heavy duty applications where most of the traffic through them is fork truck or other motorized equipment. ; These doors are mainly used in areas like industrial warehouses, drive-in freezers, or dock applications. Although people ; may pass through them, they aren't recommended for pedestrian-heavy applications.
Lead Time: 5 days + transit time
Get Shipping Estimate