Single Center Leg Floor Support - 10" to 13" Tall

Adjustable height supports for medium-duty conveyor beds

SKU: MSC-02

Manufacturer: Hytrol

These supports hold and stabilize the outside curve of the conveyor bed while adding additional capacity. As with end floor supports, they must be anchored to the floor. Anchoring holes have been pre-drilled into the legs of the support.

** Hytrol requires a minimum order for conveyor parts of $150. Please contact us for more information on minimum order requirements.

$54.40

Inquire

Specifications

Height: 10" to 13"
Color: Hytrol Green
Min. Height: 10"
Max. Height: 13"
Rated: Medium Duty
InsTalled: Outside Curve
Weight: 3.7 lbs. ea.

Description

Length & Supports

Conveyor is available in 5 foot and 10 foot lengths for straight sections. The length of the conveyor along with the number of supports underneath greatly determine its load capacity. In most applications, supports should be placed in either 5 or 10 feet intervals depending on the weight of the product you are conveying. By installing a support every 5 feet, capacity of that section increases greatly; keep in mind though that no matter how close together you place supports, the skatewheels or rollers (and their axles) also have a capacity that should not be exceeded.