SKU: HWAY-125-FLARE
Manufacturer: Ideal Shield
W-Beam Section
W-Beam w/ Round End
W-Beam w/Flared End
3' Post w/ Base Plate
6' Post
This highway guard rail is available in two mounting options: Post mounted and Base Plate mounted. Post mounting requires digging a hole to accept a 6' post. Base Plate mounting requires drilling into solid surface for attaching base plate. Please see below:
Dig or auger holes deep enough to accept 6' post (minus amount left above ground). Align post holes with one another at proper distances apart
Place posts in holes at desired depth; back-fill with dirt and tamp down firmly or back-fill with cement (best support)
Mount rail sections to posts at designated locations
Locate positions for base plates and mark hole locations, being careful to align locations with one another at proper distances apart. Drill into solid surface at each marked spot
Mount base plate to surface using anchor bolts
Mount rail to post using hardware provided
Lead Time: 3 to 5 days for inground mount, 4 to 5 weeks for base plate, + transit time
Contact Cisco-Eagle to get a Shipping Rate for this item