Highway Style Guardrail - Round Ends - 15' 6"L x 16-1/2"H x 12"D

Protect property and motorists from damage and injury

View Larger Image

View More Images

SKU: HWAY-125-RND

Manufacturer: Ideal Shield

Curb adventurous drivers from colliding with equipment and structures while protecting drivers from impact injury and keeping pedestrians safe - add highway style guardrail with round terminal ends where the potential for injury and damage exists. Round terminal ends absorb impact energy to reduce damage as well as provide a smooth end to guard rail in high pedestrian traffic areas to prevent injury and torn clothing. Select choice of 6' inground post (for soil surfaces) or 3' base plate post (for concrete surfaces).
NOT rated for public roadways.

$752.78

Inquire

Specifications

Guard Rail Run
w/o Terminal Ends: 12' 6"
Overall Length: 15' 6"
Terminal End Type: Round Ends
Depth (in.): 12
Overall dimensions: 15' 6"L x 12"D x 16-1/2"H
Rail dimensions: 12"H x 3"D x 13' 6"L
Post Centers: 12' 6"
End cap dimensions: 16"H x 9"D x 27.5"L
Construction: Hot dip galvanized W-beam steel rail (Class A, type 2 coating), steel I-beam post
Includes: (1) W-Beam rail section, (2) Round Ends, (2) Posts, (16) Rail Hardware sets, (2) Post Hardware sets. Does NOT include anchoring hardware
Standards: ASTM A-123
Weight: 365.0 lbs. ea.

Images

Click on the thumbnails to see a larger image below.

Description

Sturdy W-beam shaped steel construction resists crumpling on impact
Select from 6' inground post or 3' base plate mount post
For inground posts, you must dig a hole 3 ft. deep and place post in hole, then backfill with firmly packed soil
Base plate mount posts require drilling into concrete or hard surface for mounting
Durable posts have I-beam construction for added stability and collision resistance
Order in pre-configured lengths or call for custom configurations
NOT rated for public highways or streets

Highway Guardrail Components

W-Beam Section

W-Beam w/ Round End

W-Beam w/Flared End

3' Post w/ Base Plate

6' Post

Installation

This highway guard rail is available in two mounting options: Post mounted and Base Plate mounted. Post mounting requires digging a hole to accept a 6' post. Base Plate mounting requires drilling into solid surface for attaching base plate. Please see below:

Post Mount Installation

Dig or auger holes deep enough to accept 6' post (minus amount left above ground). Align post holes with one another at proper distances apart

Place posts in holes at desired depth; back-fill with dirt and tamp down firmly or back-fill with cement (best support)

Mount rail sections to posts at designated locations

Base Plate Mounting Method

Locate positions for base plates and mark hole locations, being careful to align locations with one another at proper distances apart. Drill into solid surface at each marked spot