Your shopping cart is currently empty.
Retainer Angle for High Profile Span Track - 72"W
Attaches High Profile Span Track to pallet rack beams
SKU: 98A0x72
Manufacturer: Unex
14-gauge galvanized retainer angle attaches to the full length of the front and rear pallet rack beams to secure High Profile Span Track. Lock Arm flips over to secure tracks into position in all three planes. This simple open/lock feature enables one person to easily change, modify or relocate track without tools once retainer angles are installed. Track can be adjusted front to back, left to right, and can be positioned flush or overhanging with ease.
- Beam Width: 72"
- Weight: 6.0 lbs. ea.
Click on the thumbnails to see a larger image below.
 |  |  |  |  |  |  |  |
 |  |  |  |  |  |
The retainer angle is attached on the outside front and outside back of the pallet rack beam. Its length is the same as your rack beam length. This 14-gauge galvanized member attaches to the full length of the front and rear beams. Lock Arm flips over to secure Span-Track into position in all three planes. Track can be adjusted front to back, left to right, and can be positioned flush or overhanging. Order two retainer angles per shelf level.
LEFT: Depicts mounting of retainer angle for both front and rear. There is no difference between the front and rear retainer angles. RIGHT: Lock Arm pictured in Locked position against retainer, and in Unlocked position outside retainer. Note: Lock Arm is repositionable through holes in side channels. Use holes at end of track for track flush with beam. Use other holes if overhang (up to recommended maximum) is desired.
How to size retainer angles: The width of your rack beam determines your retainer angle length, so you simply order a retainer angle equal to the listed rack beam width it's being installed onto. This retainer angle is 72 inches wide and installs perfectly on 72-inch wide rack beams.
Minimum order quantities apply to retainer angles due to manufacturer minimum purchase restrictions. We do not typically sell angles without a corresponding Span Track order.