Colors shown are an approximation of the actual color. Contact us for a color sample.
Gray is the standard stocked color
There is an additional charge for the optional
colors, and they may take longer to ship.
Enter File Location:
FILE TYPES ACCEPTED: .jpg, .gif, .doc, .pdf, .xls, .txt, .zip,
.dwg. If you wish to send other file types, contact customer service for instructions.
Large files may cause the form to submit slowly.
Hinged Door
3 ft or 4 ft wide by 7'-3 1/4" high opening
Transom panel sized to match partition height
Three 4"x4"x10 ga. tight pin hinges
Universal construction, works for right or left hand and inside or outside swing
Complete with two door posts and hardware
Padlock lugs standard, cylinder locks available
Dutch Door
Two separate operating door leafs
Bottom leaf locks with padlock or cylinder locks
Top leaf locks to bottom with spring bolt
10 gauge shelf, 18" deep x door width fixed to bottom leaf
Must specify hand and swing of door
Double Door
6' or 8' wide by 7'-3 1/4" high opening
Inactive leaf secured by a cane bolt at the bottom and a chain bolt at the top
Padlock lugs standard, cylinder locks available
Complete with two door posts and all hardware
Transom panel sized to match partition height
Custom size and no overhead transom doors are available
Sliding Door
3', 4', 5', 6', 8' or 10' widths
Full height partition openings of 8' and 10'
Padlock lugs standard, cylinder locks available
Complete with two door posts, two 4 wheel trolley trucks, 16 ga. track, and all hardware
Universal construction, works for left/right hand, inside/outside
Custom sizes available
Standard Front
SF-1 Key Lock Front
Standard partition lock.
Optional Front
SF-2 Thumb-Turn Latch Front
Does not provide a locking capability.
Optional Front
SF-3 Door Knob Entry Front
Does not provide a locking capability.
Standard locks are provided keyed differently
Locks may be keyed alike.
Optional master key is available
The standard cylinder can be replaced with any 1" mortise cylinder
Standard Back
SB-1 Recessed Thumb Turn Knob Standard partition lock.
Optional Back
SB-2 Interior Key Allows locking from both sides. Keyed to match front lock.
Optional Back
SB-3 Door Knob Does not provide a locking capability.
Optional Back
SB4 Lever Handle Alternative to standard door knob which meets ADA requirements.
Lever Handle
CF-1 Master Lock ADA Handle
Meets ADA requirements. Available with or without a key lock.
Lever Handle
CB-1 Master Lock ADA Handle
Meets ADA requirements. Available with or without a key lock.
Coded Entry
CF-2 Five Button Coded Access Lock
Allows code or key entry. Use with CB-2 or SB-1 fronts.
Coded Entry
CB-2 Push Paddle
Hand sized paddle for quick exit. Use with SF-1 or CF-3 fronts.
Keyed Entry With Optional Backs
CF-3 Standard 1" Mortise Key lock.
Works with CB-2, CB-3, and CB-4 backs.
SB-2 Interior Key
Push bar runs full width of door. Use with CF-3 or CF-2 lock fronts.
CB-4 Alarm Lock
Sounds a battery powered alarm when opened. Available with or without exterior key access
Key Entry With Optional Backs
CE-1 Coded Card Reader
Activates electric strike or magnetic lock upon insertion of coded card. Ten cards
supplied. Requires key pad controller for card activation.
CE-2 Ten Digit Keypad
Operates electric strike or magnetic lock upon entry of four digit pass code.
Programmable up to 64 different codes.
CE-3 Electro-Magnetic Lock
Magnetically locks sliding gates securely closed. Requires card code reader,
ten digit key pad, or remote push button to operate.
Can be used only with sliding gates.
CE-4 Electric Strike
Allows hinged gate to open when activated by encoded card, ten digit key pad, or
remote push button. Works with standard key locks.