Your shopping cart is currently empty.
Lean-Lift® Safety Inspection - Mechanical
| Item | What We Check | Verified (Y/N) |
|---|---|---|
| Condition | Inspect the lift for proper working condition and verify it operates safely under current environmental and load conditions. | Y/N |
| Deflection | Check for signs of overloading or container deflection; confirm loads are evenly distributed and within allowable limits. | Y/N |
| Stability | Verify that the unit is plumb, stable, and properly anchored according to Hänel specifications. | Y/N |
| Installation and operating manual | Ensure documentation is complete, current, and available in the local language to support safe operation. | Y/N |
| Securing against falling objects | Check that all container contents are secured and that protruding items are detected by safety light barriers. | Y/N |
| Safety signs | Confirm all required safety signs are present, intact, and compliant with Hänel standards. | Y/N |
| Labeling | Verify that all safety and operational labeling is clear, permanent, and corresponds to the operating manual requirements. | Y/N |
| Hazard area security | Inspect panels, doors, and service openings to ensure they can only be opened with tools or are electrically locked; confirm only one access point can be open at a time. | Y/N |
| Protection from hazardous movement | Ensure no crush or pinch hazards exist and that safety barriers prevent accidental reach into moving parts. | Y/N |
| Inner equipment | Inspect containers and fixtures to prevent hazards caused by loose or unsecured components. | Y/N |
| Chains and shafts | Examine drive and carrying chains for abrasion, cracks, or missing parts and verify proper lubrication. | Y/N |
| Type plate | Check that all required technical details are present—manufacturer, model, year, load ratings, and electrical specifications. | Y/N |
| Service access doors | Confirm top and bottom service doors are present and functional for maintenance work. | Y/N |
| Extractor alignment | Inspect vertical extractor alignment and stop position for proper adjustment per installation instructions. | Y/N |
| Extractor rollers | Ensure all extractor rollers have clamps and move freely; replace any worn or missing components. | Y/N |
| Bottom frame | Verify bottom frame is properly supported on rustproof shims at key structural points. | Y/N |
| Locking devices | Check both locking devices for complete assembly, proper storage, and freedom from deformation or damage. | Y/N |