Truck Cooler Mount - makes it possible to aim the air flow into the trailer space during load/off-load operations. Increasing the air flow into the trailer cools the trailer interior air which can reach temperatures well above 100 degrees. The increased air flow also provides fresh air to workers inside. Overall length: 36"; Swivel arm length: 25".
High Pressure Sodium - one of the most efficient light sources available, providing up to 100 lumens/Watt. Sodium lights have low operating temperatures and have less glare but do put a slight yellow cast to perceived colors. 
Your shopping cart is currently empty.
Dock & Truck Cooler Fan - 14" Dia., 230/460v / 3ph, 1/4-HP, 25" Swivel Arm Mount
Keep workers, trailers and docks cooler with high velocity dock fan
SKU: H14B-TC-BLUE
Manufacturer: Patterson Group
Making a hot job bearable changes the whole mindset and increases the care with which a worker does their job. Adding a dock or truck cooler fan to your loading/unloading areas is the key to worker attitudes of enthusiasm or indifference. This 14" fan powered by a 230/460v / 3ph, 1/4 HP motor moves 2600 cubic feet of air per minute with an air throw distance of 60' feet - plenty of air movement to keep heads cooler and clearer.
$759.52
- Size (in.): 14
- CFM: 2600
- HP: 1/4
- Air Throw Distance: 60'
- Voltage: 230/460v / 3ph
- Cord and Connection: Not included; will need to be fitted with cord and connector or hard wired
- Propeller: 14" dia., 3-blade galvanized aluminum
- Propeller Angle: 37°
- Fan Inlet/Outlet: High impact polypropylene
- Finger Guards: Wire Mesh
- RPM: 1725
- Decibels: 66.5 at 20 ft.; 73.9 at 3 ft.
- Motor Enclosure: TEAO standard
- Duty Cycle: Continuous
- Coverage Capacity: 1800 sq. ft.
- Warranty: 2 years
- Motor Amps: 1.4-1.5/.75
- Running Amps: 1.4/.70
- Ambient Temperature: 104°
- Weight: 51.0 lbs. ea.
Click on the thumbnails to see a larger image below.
 |  |  |  |  |
Truck Coolers used for blowing air into trailers and cooling the staging areas.
Yoke mount that comes standard on this fan is adjustable and allows fan to be angled for best air flow at the dock. Yoke mount accepts up to two lights, one on each side of mount.
Truck Cooler Mount (included):
-
Truck Cooler Mount - makes it possible to aim the air flow into the trailer space during load/off-load operations. Increasing the air flow into the trailer cools the trailer interior air which can reach temperatures well above 100 degrees. The increased air flow also provides fresh air to workers inside. Overall length: 36"; Swivel arm length: 25".
Optional Dock Lights:
- Halogen Incandescent - provides a crisp, white light with a more focused beam. The light is dimmable and provides approximately 10-30 lumens/Watt. Initial cost is high and light gets very hot, but is an energy efficient light source.
-
High Pressure Sodium - one of the most efficient light sources available, providing up to 100 lumens/Watt. Sodium lights have low operating temperatures and have less glare but do put a slight yellow cast to perceived colors. - LED - very energy efficient, have long lives, and generate very little heat during operation. Initial cost can be very expensive and you cannot use a dimmer with these, but the energy savings and long lifecycle can greatly offset purchase costs. LED light does not diffuse well, but provides very high lumens/Watt.
- 14-Inch Specifications (414 KB PDF, opens in new window)
- TC Fan Assembly (455 KB PDF, opens in new window)
Lead Time: 7-10 days + transit time
Weight: 51.0 lbs. ea.
Get Shipping Estimate
Country:
Zip:
