Your shopping cart is currently empty.
Steel Deck Platform Trucks
Heavy duty carts for bulk transporting and order picking
Get Quote- 14-gauge steel deck with reinforcement beams under the deck for added strength and durability
- Rounded corners for safety and a smooth finish
- Each corner of the deck is rounded for safety and serve as post holes for removable handles
- Epoxy powder coated green finish
- One handle is included platform trucks, but an additional handle may be purchased
- Made in the U.S.A.
- Wheel Type Selection: MOR = Mold on Rubber | Poly/CI = Polyurethane on Cast Iron | FP = Full Pneumatic
| Model No. | Deck Size | Wheel Type | Deck Height | Cap. (lbs) |
|---|---|---|---|---|
| E-SD-95-2448-RTE | 24" x 48" | MOR, 5" x 2" | 7-7/8" | 1600 |
| E-SD-96-2448-RTE | 24" x 48" | MOR, 6" x 2" | 8-5/8" | 2000 |
| E-SD-98-2448-RTE | 24" x 48" | MOR, 8" x 2" | 10-7/8" | 2400 |
| E-SD-95-2448-POE | 24" x 48" | POLY/CI, 5" x 2" | 7-7/8" | 3000 |
| E-SD-96-2448-POE | 24" x 48" | POLY/CI, 6" x 2" | 8-5/8" | 3200 |
| E-SD-98-2448-POE | 24" x 48" | POLY/CI, 8" x 2" | 10-7/8" | 3500 |
| E-SD-28-2448-FPN | 24" x 48" | FP, 8" x 2-1/2" | 10-7/8" | 1200 |
| E-SD-210-2448-FPN | 24" x 48" | FP, 10" x 3-1/2" | 13-3/8" | 1400 |
| E-SD-95-3060-RTE | 30" x 60" | MOR, 5" x 2" | 7-7/8" | 1600 |
| E-SD-96-3060-RTE | 30" x 60" | MOR, 6" x 2" | 8-5/8" | 2000 |
| E-SD-98-3060-RTE | 30" x 60" | MOR, 8" x 2" | 10-7/8" | 2400 |
| E-SD-95-3060-POE | 30" x 60" | POLY/CI, 5" x 2" | 7-7/8" | 3000 |
| E-SD-96-3060-POE | 30" x 60" | POLY/CI, 6" x 2" | 8-5/8" | 3200 |
| E-SD-98-3060-POE | 30" x 60" | POLY/CI, 8" x 2" | 10-7/8" | 3500 |
| E-SD-28-3060-FPN | 30" x 60" | FP, 8" x 2-1/2" | 10-7/8" | 1200 |
| E-SD-210-3060-FPN | 30" x 60" | FP, 10" x 3-1/2" | 13-3/8" | 1400 |
| E-SD-95-3672-RTE | 36" x 72" | MOR, 5" x 2" | 7-7/8" | 1600 |
| E-SD-96-3672-RTE | 36" x 72" | MOR, 6" x 2" | 8-5/8" | 2000 |
| E-SD-98-3672-RTE | 36" x 72" | MOR, 8" x 2" | 10-7/8" | 2400 |
| E-SD-95-3672-POE | 36" x 72" | POLY/CI, 5" x 2" | 7-7/8" | 3000 |
| E-SD-96-3672-POE | 36" x 72" | POLY/CI, 6" x 2" | 8-5/8" | 3200 |
| E-SD-98-3672-POE | 36" x 72" | POLY/CI, 8" x 2" | 10-7/8" | 3500 |
| E-SD-28-3672-FPN | 36" x 72" | FP, 8" x 2-1/2" | 10-7/8" | 1200 |
| E-SD-210-3672-FPN | 36" x 72" | FP, 10" x 3-1/2" | 13-3/8" | 1400 |
Wheel Types explained
Specify when you order.
Mold on Rubber Wheels
Also known as mold-on rubber, the rubber on iron wheel is floor-protective, provides long tread life, operates quietly, and is highly resilient Suggested for use over almost all floor surfaces and for a variety of applications. Found mostly in freight terminals, warehouses, and manufacturing facilities.
Polyurethane on Cast Iron Wheels
Poly wheels are designed primarily for applications involving high moisture that would normally destroy conventionally bonded wheels. Tread is non-marking and provide a smooth, quiet ride even over rough surfaces.
Full Pneumatic Wheels
Provides smooth, shock resistant operation and load protection. Use for handling delicate instruments and breakable components. Indoor and outdoor use are recommended. This wheel is particularly well-suited for use in aerospace and aircraft applications.