Extra length laminated dock bumpers are used on loading docks which have installed dock seals, or where refrigeration or warmth is need. Loading dock bumper and the dock-seal interact to completely seal the truck to the dock.
Model No. | Height | Length | Thickness | End Plate Finish | Price | ||
---|---|---|---|---|---|---|---|
B4506-87-A | 6" | 87" | 4.5" | Black Powder Coat | $291.71 |
|
|
B4506-87-GALV-A | 6" | 87" | 4.5" | Galvanized | $331.14 |
|
|
B4506-99-A | 6" | 99" | 4.5" | Black Powder Coat | $339.53 |
|
|
B4506-99-GALV-A | 6" | 99" | 4.5" | Galvanized | $378.97 |
|
|
B4510-51-A | 10" | 51" | 4.5" | Black Powder Coat | $248.23 |
|
|
B4510-51-GALV-A | 10" | 51" | 4.5" | Galvanized | $277.66 |
|
|
B610-51-A | 10" | 51" | 6" | Black Powder Coat | $342.33 |
|
|
B610-51-GALV-A | 10" | 51" | 6" | Galvanized | $376.76 |
|
|
B4510-63-A | 10" | 63" | 4.5" | Black Powder Coat | $312.16 |
|
|
B4510-63-GALV-A | 10" | 63" | 4.5" | Galvanized | $341.59 |
|
|
B610-63-A | 10" | 63" | 6" | Black Powder Coat | $409.28 |
|
|
B610-63-GALV-A | 10" | 63" | 6" | Galvanized | $443.71 |
|
Model No. | Height | Length | Thickness | End Plate Finish | Price | ||
---|---|---|---|---|---|---|---|
B4506-87-A | 6" | 87" | 4.5" | Black Powder Coat | $291.71 |
|
|
B4506-87-GALV-A | 6" | 87" | 4.5" | Galvanized | $331.14 |
|
|
B4506-99-A | 6" | 99" | 4.5" | Black Powder Coat | $339.53 |
|
|
B4506-99-GALV-A | 6" | 99" | 4.5" | Galvanized | $378.97 |
|
|
B4510-51-A | 10" | 51" | 4.5" | Black Powder Coat | $248.23 |
|
|
B4510-51-GALV-A | 10" | 51" | 4.5" | Galvanized | $277.66 |
|
|
B610-51-A | 10" | 51" | 6" | Black Powder Coat | $342.33 |
|
|
B610-51-GALV-A | 10" | 51" | 6" | Galvanized | $376.76 |
|
|
B4510-63-A | 10" | 63" | 4.5" | Black Powder Coat | $312.16 |
|
|
B4510-63-GALV-A | 10" | 63" | 4.5" | Galvanized | $341.59 |
|
|
B610-63-A | 10" | 63" | 6" | Black Powder Coat | $409.28 |
|
|
B610-63-GALV-A | 10" | 63" | 6" | Galvanized | $443.71 |
|
Bumpers may be ordered with structural steel angles or flat plates at each end. You will need to specify the end plates when placing an order. When using angled plates, they are bolted to the dock (recommended). When using flat plates, they are welded to the dock.
Extra length dock bumpers require intermediate support, so anchorage devices are included for this purpose. There are four styles of anchorage device available for different dock conditions. When placing an order, you must specify which type of anchorage device to include. Below is a quick guide to which type you may need for your application.
1-866-443-5648
© Cisco-Eagle 2025. All Rights Reserved