Your shopping cart is currently empty.
Garlock Safety Systems
Rail systems, safety lines, and other equipment to help reduce falls from rooftops, elevated platforms and more
To support rigorous fall prevention efforts and OSHA compliance, Garlock provides safety equipment for a variety of elevated areas, including mezzanines, docks and rooftops. Look for swing gates to manage pedestrian access to drop offs and skylight guards in several styles, along with warning line systems to visually highlight dangerous drop-offs.
Roof Hatch Protector Kits
Protect workers from tripping and falling into a roof hatch with this rail kit that satisfies OSHA hatch safety standards. The snap-together rail system includes a self-closing gate that prevents accidental entry into the guarded area. Optional grab bars enhance safety when climbing in or out of the hatch.
Manual Swing Gates
Keep dock doors closed off to edge drop-off and dangerous falls with these manual swing gates that ride on a wheel for ease of operation. Sizes range from 4' wide to 12' wide. Sturdy welded steel construction.
Garlock Mezzanine Safety Gates
Garlock mezzanine safety gates offer innovative load and unload fall protection with cantilever, overhead roller and rack bay roller safety gates. These gates help protect workers from the risk of falls while working with elevated loads.
Compression Fit Skylight Guards
The ScreenGuard compression fit skylight guard installs easily without tools. The large format metal mesh bows enough to allow the ends to be fitted at the end skylight frames. A strong fall protection guard against rooftop workers falling into the skylight.
Skylight & Floor Opening Guards
Easily assemble a safety cage around skylight or floor opening hatches with this fall protection guard that help keep workers safe. Angle corner posts, base plates and side rails combine to provide a sturdy rail system to prevent dangerous falls over rooftop obstacles.
Manual Cantilever Dock Gate
Cantilever dock gates that fold up in the raised position are perfect for dock conditions where gate swing space is limited and you want to improve safety at the dock edge. These gates lift at a vertical angle to allow access and descend to close off dock edge.
Flatbed Guard Rail
Protect drivers and workers from dangerous falls while loading/unloading a flatbed trailer with a guard rail system that runs around the trailer perimeter and even provides access through either a rolling stairway or vertical ladder.
Tie-Off Anchor
Tie-off systems provide a safe, secure anchor point for lanyards, ropes or cables to be attached as part of a fall protection program. Non-penetrating designs allow for quick relocation and set-up.
Perimeter Clamp System
A perimeter clamp system relies on special roof clamps and stanchions that accept your own 2x4's for rails at top and mid-rail positions. A quick and easy fall protection to setup that is strong and highly effective.
RailGuard 200 Railing System
RailGuard 200 fall protection systems create barriers on rooftops and elevated platforms to keep workers safely away from leading edge fall hazards. These guarding systems consist of modular rail sections and base plates that lock together for secure, sturdy protection.