Your shopping cart is currently empty.
High Profile Carton Flow Track - 12"W, 55"-60"D, 3" Roller Centers
Install on top of rack beams for smooth flow, easy configuration, and optimum front-to-back space utilization
SKU: HighPro123C
Manufacturer: Unex
High Profile carton flow tracks eliminate flimsy carton rails and replace them with sturdy roller tracks, reducing replacement costs and increasing productivity. They install on top of pallet rack beams and can overhang the front or back to maximize linear space. It mounts to beams with a retainer angle & lock arm. Typically used in loose-pick applications or where contouring is preferred. Full-width rollers provide total carton support and consistent flow. Fully adjustable track lets you easily slot or re-profile carton flow to match SKU's. Rollers are 3/4" diameter aluminum.
- Roller Centers: 3"
- Width: 12"
- Length: 55"-60"
- Price Range: Contact Us
- Track Width: 12"
- Choosing Track Length: Track length must exceed the outside to outside measurement between front and back beams
- Length: 55" - 60" (custom sizes available in 1" increments)
- Roller Centers: 3"
- Track Overhang: Front, Back, or Both
- Capacity: Determined by length of unsupported track
- Weight: 15.0 lbs. ea.
Combine Your Purchase With
Click on the thumbnails to see a larger image below.
 |  |  |  |  |  |  |  |
 |  |  |  |  |  |
Sizing and Capacity
|
Unsupported |
Track
Cap. |
Max.
Track |
|
3'0" |
35 lbs./sq. ft. |
1'0" |
|
4'0" |
35 lbs./sq. ft. |
1'0" |
|
5'0" |
35 lbs./sq. ft. |
1'4" |
|
6'0" |
35 lbs./sq. ft. |
1'8" |
|
7'0" |
35 lbs./sq. ft. |
1'8" |
|
8'0" |
40 lbs./ft. |
2'0" |
|
9'0" |
30 lbs./ft. |
2'0" |
|
10'0" |
20 lbs./ft. |
2'0" |
- The front end of the track acts as a raised carton stop and the rear end features a lead bar to absorb impact loading. Both ends come with 2" label holders built in.
- Track is fully adjustable left, right, front and back, providing complete flexibility to slot or re-profile carton flow to match SKU's.
- Rollers are 3/4" diameter aluminum.
- In applications with pallet storage above carton flow, a flush face (no overhang) is required to avoid fork truck damage to the track while loading and unloading pallets.
-
Retainer angles are required for mounting high profile tracks: This 14-gauge galvanized member attaches to the full length of the front and rear beams. Lock Arm flips over to secure Span-Track into position in all three planes. Track can be adjusted front to back, left to right, and can be positioned flush or overhanging. Order two retainer angles per shelf level. The length of your retainer angle will be exactly equal to your pallet rack load beam length.
- Track can overhang rack at front and rear. Pick face profile can be straight or contoured.
- Most full case picks use a straight face. Loose picks use a contoured face--a lay-back design with a stepped effect - which optimizes products visibility and access.
- Many other sizes and configurations are available. Contact us for assistance.
- Installation Instructions (838 KB PDF, opens in new window)
- Brochure (1.4 MB PDF, opens in new window)
