DEA Evidence Storage Cage - 8'-2"H x 10'L x 15'W, 4 walls w/ Ceiling

• Color: Gray
• Height:  8'-2"
• Length:  10'
• Width:  15'
• # of Sides:  4
• Panels:  Make up wall and the ceiling
• Panel Construction:  10 gauge steel wire woven into 2" x 1" rectangular mesh
• Hardware:  3/8" standard thread grade two nuts and bolts; 3/8" wedge anchors - included
• Panel Stiffeners:  (2) 1/4" x 3/4" vertical stiffeners
• Posts:  2" x 2", 14 gauge steel tubing
• Base Plates:  2" x 7" x 1/4" flat steel welded to each post
• Decorative Caps:  Tack welded to the top of each post
• Door W x H:  3' x 7'
• Panel Frame:  1-1/4" x 1-1/4" x 1/8" angle steel
• Finish:  Acrylic enamel
• Touch-Up Paint:  Included
• Door Type:  Hinged; self-closing and latching with standard key lock
• Weight: 1017.0 lbs. ea.

Click on the thumbnails to see a larger image below.

1026

Loading...

DEA Storage Cages can help solve many of the special problems for drug manufacturers, distributors, and wholesalers face when it comes to regulations or in-plant security of Scheduled III, IV, and V controlled substances.

• Doors are self-closing and self-locking. When installed, all hardware should be brazed, pinned or tack-welded in place for compliance; Universal construction allows door installation left or right, inside or outside; Sliding door must be installed on 12" wide minimum cage wall for full 6' opening capability
• Partitions are assembled with durable 3/8" hardware
• Hardware is not accessible from the exterior
• Posts have welded on base plates for lagging to the floor
• Double-tough construction provides unequaled strength and security
• Installation is fast because the design uses fewer total parts
• Panels install horizontally between 14-gauge tubular posts. They are steel wire woven into 2" x 1" rectangular mesh and securely welded to a 1¼" x 1¼" x 3/16" steel angle frame
• Walls have minimum 1-1/2" horizontal reinforcement at least every 60 inches and the panels are mounted flush to the floor
• Listed dimensions reflect exterior size; enclosed dimensions are slightly smaller
• Standard footplates are 2" x 7". They extend outside the post by 2½" per corner post position depending on footplate orientation. They will slightly increase overall dimensions
• If you are in a seismic zone, or your floor is not smooth or even, a larger footplate may be required
• If overall dimensions are extremely critical to your project, contact us for assistance. We can calculate the precise size of your enclosure in advance
• Finished in gray acrylic enamel. Available with gray powder coat finish upon request at no extra cost (may extend lead time). Other colors are also available in powder coat for an additional fee; contact us for more information.

4-sided structure: Four-wall wire enclosure unit is freestanding and can be utilized anywhere in a facility to provide a secure enclosure. You can place them virtually anywhere that has a suitable floor and space. Cages are mounted flush to the floor and the mounting hardware is permanently fixed. If you need assistance, please contact us.

Other sizes and options are available, please contact customer service for further assistance.

California Proposition 65

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm.  For more information – www.p65warnings.ca.gov.

Lead Time: 3 weeks + transit time

Contact Cisco-Eagle to get a Shipping Rate for this item