Your shopping cart is currently empty.
Electric Hoist w/ Push Trolley - 1/2 Ton, 20' Lift, 29 ft/min
Move loads along a beam easily with smooth rolling trolley
SKU: NERP005S-20
Manufacturer: Harrington Hoists
With a load capacity of 1/2 ton, this electric hoist with push trolley that glides on rollers along the beam length, makes movement of a load much easier. This hoist features perpendicular positioning in relation to the beam, and has a quick change suspension pin system. The cool running motor has a special fan, fan blade and cover design that provides high air flow for reliable service life. It also features heavy duty contactors with mechanical interlocks. Trolley shaft fits beam flange widths 2.28" - 4.00" and features all steel wheels, with sealed ball bearings, that run on both flat and tapered beam flanges. The load hook resists lateral forces through the use of a notched hook and latch system. Not duty cycle rated.
$4,486.75
- Max. Capacity: 1/2 ton
- Lift Speed: 29 ft/min
- Chain Lift: 20'
- Headroom: 16.3"
- Horsepower: 1.2
- Hoist Type: 90
- Duty Cycle: 60 min.
- Standard Voltage: 208/230/460 volts, 3-phase, 4.8 amps
- Operating Conditions: Suggested -4 degrees to +104 degrees F; humidity 85% or less
- Power Supply Length: 15' standard (longer lengths available on request)
- Mounting: Hook, lug or chain
- Control Cord: 16', 110 volts (24 volt available on request)
- Warranty: 10 yr. manufacturer warranty on motor brake
- Options: Canvas or steel chain container available upon request
- Weight: 96.0 lbs. ea.
Pairing an Electric Hoist with a Trolley
Electric hoists literally take all the work out of lifting heavy loads.
The hoist itself provides all the power needed to lift the load up high
enough to be moved, worked on or transferred to another area of the
facility.
But without a trolley, you won't be moving your load very far. Trolleys come in many sizes and types but the three primary kinds of trolleys are push, geared and electric.
A push trolley uses manual labor to push the load along the support member the trolley rolls on. Push trolleys come equipped with sturdy wheels specially made to carry heavy loads and to roll smoothly under great downward pressure. This makes the trolley easier to push under load, and helps you accomplish your goals quicker and easier than having to physically haul the loaded object on a cart or hand truck, or, even worse, just by back breaking manpower alone.
- Unique load sheave system with more pockets to minimize chain vibration and chain wear; 5 pockets std.
- Comes with low-profile upper and lower limit switches to prevent overdriving the lift chain
- Extremely strong nickel plated load chain is grade 80, meets DIN requirements, and has been heat-treated using special process to improve material integrity, adding to fatigue resistance and service life
- Motor is a 1.2HP, 208/230/460 volt, 3-phase, and draws 4.8 amps
- Built without harmful finishes for environmental safety, and meets RoHS standards.
- Count hour meter comes standard to track lowering starts and hoist on time; displays information to aid scheduling of preventive maintenance
- The 16 ft. pendant control has an ergonomic design with 2 push-button (momentary contact) controls
- Carbon friction clutch is standard and works in conjunction with a current driven electromagnetic brake, that holds load in place until motor is energized, for added safety and assurance load will not slip
Complies with the following classifications and codes:
- ANSI/NFPA 70, "National Electric Code"
- ANSI/ASME B30.16, "Safety Standard - Overhead Hoists (Under-hung)"
- ANSI/ASME HST - 1M, "Performance Standard for Electric Chain Hoists"
- OSHA Section 1910.179 of Title 29, "Occupational Safety and Health Regulations - Overhead and Gantry Cranes"
- ANSI/ASME B30.11, "Safety Standard - Monorails and Under-hung Cranes"
- ANSI/ASME B30.17, "Safety Standard - Overhead and Gantry Cranes"
- UL 1340, "Standard for Hoists" and is UL listed
- Electric Chain Hoist Catalog (5.62 MB, Opens in new window)
- Electric Hoist Owners Manual (2.67 MB, Opens in new window)
- Electric Hoist Parts List (3.7 MB, Opens in new window)
- Push Trolley Owners Manual (3.9 MB PDF, Opens in new window)
- Push Trolley Parts List (1.86 MB PDF, Opens in new window)
Lead Time: 5 to 6 weeks + transit time
Weight: 96.0 lbs. ea.
Get Shipping Estimate
Country:
Zip:
