Your shopping cart is currently empty.
3-Way Adjust Steel Gantry Crane w/ Aluminum I-Beam - 2 Ton Cap., 10' 2" Clear Span, 8' 7" to 13' 2" Overall Ht.
Lightweight aluminum beam and 3-way adjustability provide true lift and load flexibility
SKU: 2T1512SA
Manufacturer: Spanco
With a steel frame made of heavy-duty square tubing stock and a lightweight aluminum I-beam, this gantry crane has a capacity of 2 tons and a maximum under-beam height of 13' 2". Because the crane is adjustable in 3 ways, it offers the greatest range of flexibility, allowing use on uneven floors as well as travel through narrow doorways and under obstructions. This versatile crane has the ability to serve as a cantilever crane when appropriate counterbalance is added, making it possible to slide the load through the A-frame structure and off the beam to a waiting work station. The crane design is extremely stable with an I-beam that self-centers over a load no matter the leg positioning or frame angle.
$16,642.38
- Capacity: 2 Ton
- Overall Span: 15'
- Under Beam Height: 7' 2" to 11' 9"
- Overall Height: 8' 7" to 13' 2"
- Clear Span: 10' 2"
- Caster Frame Spread: 6' 2" to 10' 2"
- Beam Size: 12" high with 5" wide flanges
- Casters: Swivel with 8" polyurethane wheels
- Weight: 1133.0 lbs. ea.
Click on the thumbnails to see a larger image below.
 |  |
- Constructed of heavy gauge square tubing with zinc plated hardware for strength and durability
- I-beam placement remains secure during span adjustment
- Main legs adjust at 6 inch increments using pairs of push/pull pins
- Simple tread adjustments for moving through narrow passages
- Caster frame spread must always be at least half of overall height
- A cable assembly inside caster frame tubes prevents over-spreading of tread
- Casters have four-position swivel locks and mold-on non-marking polyurethane wheels
- Optional cart kit to convert caster frames into cart and detachable height adjustment kit available upon request
- NOT for lifting, transporting, or supporting humans in any way
T-Series Gantry Crane Adjustability
Spanco T-Series gantry cranes can be adjusted in three ways: height, span, and tread.
Height Adjustment - This consists of changing the length of the telescoping leg support frames. Steel push/pull pins are removed from the frames, the upper portion of the frame raised or lowered, and the steel pins reinserted at the new height on each leg. Height adjustment is especially useful when there are overhead obstructions that must be cleared during transit
Span adjustment - This is the ability to change the clear span distance on the beam. There may be times when the traffic access in a facility is narrow, but overhead clearances are wide open. In this case, you would move the leg frames closer together on the I-beam, making the clear span more narrow in order to move through the area. The T-Series crane also allows up to a 25 percent cantilever of the span when using an appropriate counterweight.
Tread adjustment - At times both traffic access and overhead space are narrow. In this case, you need to reduce the tread width. Tread width is the space between wheels on one leg frame. This measurement determines how much space is needed to move the gantry crane lengthwise through a facility while maintaining the full span length.
No matter your load lifting and transport needs, you will find three-way adjustable gantry cranes a very convenient and versatile way to move heavy loads through a facility.
- T Series Gantry Crane Installation & Instructions (11.05 MB PDF - opens in new window)
- Gantry Crane Guide (12.22 MB PDF - opens in new window)
- Spanco Product Warranty (0.16 MB PDF - opens in new window)
Lead Time: Contact us for lead time + transit time
Contact Cisco-Eagle to get a Shipping Rate for this item
