Your shopping cart is currently empty.
Manual Turntable - 36" x 36", 4,000 lb. Cap.
Improve ergonomics by rotating the work to your position
SKU: STT-036036-0040-MN
Manufacturer: Autoquip
Manual turntables enable workers to reduce reaching, bending, twisting and having to walk around a load in order to build-up or teardown pallets, do parts assembly or disassembly, welding, painting, and moving work to a conveyor system. Made for heavy-duty use, this turntable is easily rotated under load. The table measures 36 x 36 inches with a small base size of 24 x 24 inches. Total height is 4 inches. Table has a capacity of 4,000 lbs. Made in the USA.
- Color: Choose
- Capacity: 4,000 lbs.
- Standard Turntable Size: 36" x 36"
- Base Size: 24" x 24"
- Height: 4"
- Max Turntable Size (Upon Request): 44" x 44"
- Max Side Load (Standard Size Turntable): 3,040 lbs.
- Rotation Direction: CW/CCW
- Turn Force at Corners: 55 to 65 lbs.
- Weight: 200.0 lbs. ea.
Durability and Quality
- Chrome plated center kingpin prevents corrosion of the pin and reduces wear on the sprocket center bearing.
- High impact, spiral wound bearing at the main pivot point provides maintenance-free, rugged resistance to abrasion, impact, and uneven loads.
- 1/2-inch-thick steel platform minimizes deck deflection and maximizes load stability.
Maintenance and Warranty
- Autoquip offers an industry-best 2 year warranty on all parts as a promise that you've purchased the industry's most reliable turntable.
- Maintenance-free bearings at pivot points require no lubrication.
Simplicity
- Lowest turning forces in the industry.
- 4-inch lowered height allows greater on and off load flexibility and increases total ergonomic range.
- Lag-down holes in the base allow for easier relocation.
Safety
- Turntable retention system prevents the platform from tipping during any type of edge or off-center loading.
- Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.
- Compliance with recognized standards:
- ASTM - A36 - Structural Steel Standard
- ANSI Z535 - Safety Labeling Requirements
- AWS D.1 - Welding Standards
- Applicable portions of OSHA 29CFR1910 - General workplace safety
Options
Turntable- Spring loaded detent consisting of a machined pin and guide assembly
- Manually operated stop consisting of a machined locking pin & release handle assembly
- Special color matching available. Please call
California Proposition 65
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information – www.p65warnings.ca.gov.
- Full Line Brochure (2.77MB, PDF, Opens in new window)
- Manual (2.21MB, PDF, Opens in new window)
