Tilt Table - 23" x 47", 45 Degrees of Travel, 4,000 lb. Cap.

Premium Features

• All scissors rollers are captured within structural steel channels to provide excellent load stability.
• High impact, spiral wound bearings at every pivot point provide maintenance-free, rugged resistance to abrasion, impact, and uneven loads.
• Structural cross-members at every pinned joint in the scissors assembly minimize leg deflection due to twisting or spreading under high or uneven loading.
• All hydraulic cylinders contain two-piece, self-aligning piston rods that transmit minimal side forces to the cylinder hinges/pins, significantly reducing wear.
• Structural steel channels in all upper and lower frames provide additional rigidity and resistance to twisting and bending of the lift under load.
• Solid steel legs and added stiffeners provide overall stability and straight, repeatable roller tracking as the lift raises and lowers.
• Joints, the most critical wear points in the lift, feature chrome-plated, 100,000 psi, ultimate-strength pins for premium load strength and long life.
• Minimum 1/4-inch-thick steel-reinforced platform minimizes deck deflection, maximizes load stability, and greatly extends the life of the platform deck.

Maintenance and Warranty

• Autoquip offers an industry-best 2 year warranty on all parts as a promise that you've purchased the industry's most reliable work station tilter.
• On-board maintenance devices enable maintenance crews to safely and effectively block open the scissors during inspection and routine maintenance.
• Sturdy, semi-transparent polyurethane oil reservoir provides an easily visible method of checking fluid levels and eliminates oil contamination due to rust.
• Low pressure hydraulic circuit extends the life of all hydraulic components and puts less stress on the electric motor.
• Double wire braided Parker hydraulic hoses resist wear, abrasion, and leaks.

Simplicity

• TiltLift's extremely small footprint allows workers to stand close to the product, which minimizes reaching and keeps work within the ergonomic "power zone."
• Non-intrusive design minimizes floor space requirements for the operator.
• Extremely low collapsed height increases its total ergonomic range.
• Standard controls are prewired and internal power unit is onboard. Installation simply includes lagging the unit to the ground and connecting to electricity.

Safety

• Non-intrusive design keeps the load centered over the base frame of the lift at all times.
• Hydraulic velocity fuses completely stop lifts in the unlikely event of uncontrolled descent due to sudden hose rupture.
• Minimum 3:1 structural factor of safety makes these lifts the most structurally sound lift in the industry.

Options

• Platforms larger than standard and up to maximum allowable size with straight sides (increases lowered height .25">

• Replace .5 hp pump unit with 1 hp unit
• Three phase for .5 hp or 1 hp pump units

• Hand held push button station on 10' cord instead of footswitch
• Guarded, NEMA 4, up/down foot switch (shipped loose) (add 3 weeks to lead time)
• Upper/lower travel limit switch (shipped loose)

• Special platform skirting. Please call

• Special color matching and other paint options available. Please call

California Proposition 65

WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer and reproductive harm.  For more information – www.p65warnings.ca.gov.

• Full Line Brochure (2.77MB, PDF, Opens in new window)