6 Ft. Speed Bump with Yellow Reflective Tape & Cat Eye Reflectors - Recycled Rubber

Help slow traffic 1-5 mph in and around your facility

View More Images

SKU: PG-ENC-26111

Manufacturer: Post Guard

Slow vehicular traffic 1-5 mph with this durable and cost effective speed bump. Made of 100% recycled rubber and striped in yellow and black, this speed bump is highly visible through molded-in tape and cat's eye reflectors. Installation is easy for either temporary (adhesive tape) or permanent (asphalt spikes or cement bolts) use. Resists UV light, moisture, oil and temperature extremes. May be installed in several sections to increase length of bump. Channeled bottom allows drainage flow-through and covers cabling and pipe. Includes manufacturer's warranty.

$168.31

Inquire

Specifications

Type: Speed Bump
Length: 72"
Width: 12"
Height: 2-1/4"
Construction: Made of 100% recycled rubber and slows down vehicles by 2-5 mph as they cross over the speed bump; An excellent way to slow traffic in parking lots and driveways. Optional end caps greatly enhance the end finish of the speed bump and helps prevent pedestrians from tripping over the ends.
Misc.: Speed bump structure securely conforms to surface deviations, yet may be relocated with ease. Bottom of speed bump has channels to facilitate drainage from traffic surfaces, and may also be used to cover pipes and cables.
Options: Optional end caps greatly enhance the end finish of the speed bump and helps prevent pedestrians from tripping over the ends.
Weight: 51.0 lbs. ea.

Accessories

Combine Your Purchase With

Speed Bump End Cap (single) - 9"L x 12"W x 2-1/4"H, Black, Recycled Rubber

$38.82

Qty:

Images

Click on the thumbnails to see a larger image below.

Full speed bump shown in reflective cat eyes and end caps attached

Description

Installation Instructions

Installation of Park-It and Easy Rider with spikes (recommended for asphalt surfaces)

Drill 1/2" diameter holes in the asphalt through the product's holes Drive 1/2" rebar spike (14" long) through the holes in the product

Installation of Park-It and Easy Rider with lag bolts and metal shields (recommended for cement surfaces)

Use 1/2" or 5/8 lag bolts (6" long for Park-It, 5.5" long for Easy Rider) Drill 1/2" dia. pilot holes through the product's installation holes Remove the product, re-drill the holes for the diameter and depth required by the metal shields Install the metal shields, re-position the product and bolt it with lag bolts