Cisco-Eagle Logo
Safety & Ergonomics > Fall Protection > Overhead Tie-Off Systems > Mobile Griffin Systems > Skid Mounted Mobile Tie-Off System, 20' Single Track, 10' Arm Reach, 1 Person Cap.

Skid Mounted Mobile Tie-Off System, 20' Single Track, 10' Arm Reach, 1 Person Cap.

Easily relocate anchor systems to a desired location using a single fork truck

Skid Mounted Mobile Tie-Off System, 20' Single Track, 10' Arm Reach, 1 Person Cap.
View Larger Image

SKU: FAMTPB-1-10-20-520

Manufacturer: Rigid Lifelines

Skid mounted mobile tie-off systems provide an overhead tie-off point that can be relocated by a large forklift from work station to work station, indoors or outdoors. Ten foot arms extend the 20' anchor track out so that a single worker has sufficient room to navigate the work area. The enclosed, single track design prevents any contaminants from building up and allows the specially designed anchor trolley to glide along with the worker. With the trolley free to move with the worker, the tie-off point stays directly overhead and reduces the risk of fall swing hazards. In the event of a fall, hardened alloy steel cones in the anchor trolley engage and act as a hands-free braking system virtually eliminating post-fall drift and increasing the chances for self-rescue. Manual leveling jack plates help to ensure that the anchor track is level to further reduce the risk of post-fall drift.
This product meets or exceeds OSHA requirements 1910 and 1926 as well as ANSI Z359 regulations when used properly.
Self Retracting Lanyard

Self Retracting Lanyards are durable, yet lightweight to connect worker-worn harnesses to a fixed tie off point to help prevent injury in case of a fall while working at height. The galvanized tie-off cable unwinds and retracts as the worker moves, but if the worker falls the abrupt pull on the lanyard engages the slip-braking and will arrest the fall.

  • 900 lbs. maximum average arresting force
  • 24" or 54" fall arrest distance
  • Zinc-plated steel snap hooks with 3,600 lb. gate strength
  • High impact strength polymer thermoplastic or durable aluminum housing
  • ANSI Z359.11-2014; ANSI A10.32-2012; OSHA 1910; OSHA 1926 Subpart M standards met
  • Class A and B ratings available
  • Retrieval taglines and mounting carabiner included
  • 20' Maximum Lanyard Length
  • 3/16" Galvanized Wire Cable Lanyard
  • High Impact Strength Polymer Thermoplastic Housing
  • 420 lb. Working Capacity
  • 24" Maximum Arrest Distance
  • ANSI Z359.14 Class A & B
  • 30' Maximum Lanyard Length
  • 3/16" Galvanized Wire Cable Lanyard
  • High Impact Strength Polymer Thermoplastic
  • 420 lb. Working Capacity
  • 24" Maximum Arrest Distance
  • ANSI Z359.14 Class A & B
  • 20' Maximum Lanyard Length
  • 3/16" Steel Wire Cable Lanyard
  • Durable Aluminum Housing
  • 420 lb. Working Capacity
  • 54" Maximum Arrest Distance
  • ANSI Z359.14 Class B
  • 30' Maximum Lanyard Length
  • 3/16" Galvanized Wire Cable Lanyard
  • Durable Aluminum Housing
  • 420 lb. Working Capacity
  • 54" Maximum Arrest Distance
  • ANSI Z359.14 Class B
  • 50' Maximum Lanyard Length
  • 3/16" Steel Wire Rope Lanyard
  • High Impact Strength Polymer Thermoplastic
  • 310 lb. Working Capacity
  • 54" Maximum Arrest Distance
  • ANSI Z359.14 Class B
Fall Protection Harness

Full-body fall protection harnesses with a maximum capacity of 310 pounds help to keep workers safe in the event of a fall from height. Quick connect buckles allow for the straps of the harness to be fastened and adjusted easily for the best possible fit for the chest and legs, while the waistband strap utilizes a grommeted strap for a more secure fit. A single D-ring on the back of the harness attaches to a fall protection lanyard to arrest the fall.

  • Comes in sizes small, medium and large
  • Made from High Tenacity Polyester Webbing
  • Meets ANSI Z359.11-2014, ANSI A10.32-2012, OSHA 1910.66, and OSHA 1926.502 Subpart M Standards

$37,663.77

$37,871.59
Inquire

Options Selected

  • Self Retracting Lanyards : Self Retracting Fall Protection Lanyard, 20' L, 420 lb. Capacity, ANSI Class A & B (RL-C9000)
  • Fall Protection Harness : Full Body Fall Protection Harness (RL-B2202)

Click on the thumbnails to see a larger image below.

Skid Mounted (Griffin) Mobile Lifeline System DrawingSkid Mounted (Griffin) Mobile Lifeline System Base PlatformSkid Mounted (Griffin) Mobile Lifeline System in UseSkid Mounted (Griffin) Mobile Lifeline System in Flatbed Loading/Unloading OperationSkid Mounted (Griffin) Mobile Lifeline System Angle ViewSkid Mounted (Griffin) Mobile Lifeline System in Flatbed Loading/Unloading OperationAnchor Trolley
Skid Mounted (Griffin) Mobile Lifeline System Drawing
Skid Mounted (Griffin) Mobile Lifeline System Drawing
0
  • Lead Time: 6 Weeks + transit time
  • Platform: Skid
  • Track Length: 20 ft.
  • Arm Reach: 10 ft.
  • Worker Capacity: 1
  • Max. Worker Weight Cap.: 400 lbs.
  • Jack Plate Leveling: Manual
  • Assembly: Bolt-Together
  • Track: Enclosed Single Rail
  • Anchor Trolley: Included
  • Standards: ANSI & OSHA
  • Application Examples: Loading, unloading, & tarping flatbed trailers/ manufacturing and maintenance of large vehicles & equipment/ Aerospace inspection, production & maintenance
  • Weight: 14877.0 lbs. ea.

Related Products

Plastic Sleeved Steel Handrail - Starter, 42"H x 5'L x 1.9"Dia.
Plastic Sleeved Steel Handrail - Starter, 42"H x 5'L x 1.9"Dia.
SpeedGuard II Flatbed Truck Guard Rail Kit w/ Pockets & 4-Wheeled Cart
SpeedGuard II Flatbed Truck Guard Rail Kit w/ Pockets & 4-Wheeled Cart
Pallet Rack Safety Net - 10'3"W x 10'H, 1,250 lbs Capacity, 1-3/4" Mesh
Pallet Rack Safety Net - 10'3"W x 10'H, 1,250 lbs Capacity, 1-3/4" Mesh

© Cisco-Eagle 2023. All Rights Reserved

View Quote

Shopping Cart: 0 Items

Your shopping cart is currently empty.
Discounts:
Total:
View cart

Your Quote: 0 Items

Your wish list is currently empty.
Build Your Quote Add to Cart
Total:
Loading...