Add end caps to your speed hump to lengthen the speed hump and create a beveled finish at the ends. Lightweight and easy to install using temporary or permanent installation. End caps have yellow tape stripes around outside edges.
This is the "female" style end cap. Order one male and one female end cap for a complete speed hump.
Installation of Park-It and Easy Rider with spikes (recommended for asphalt surfaces)
Drill 1/2" diameter holes in the asphalt through the product's holes
Drive 1/2" rebar spike (14" long) through the holes in the product
Installation of Park-It and Easy Rider with lag bolts and metal shields (recommended for cement surfaces)
Use 1/2" or 5/8 lag bolts (6" long for Park-It, 5.5" long for Easy Rider)
Drill 1/2" dia. pilot holes through the product's installation holes
Remove the product, re-drill the holes for the diameter and depth required by the metal shields
Install the metal shields, re-position the product and bolt it with lag bolts