Pallet Rack Safety Guards - Welded Wire Mesh

Bolts directly to teardrop pallet rack frames to help prevent product spillage, damage and unsafe rack aisles

Get Quote

"Wire panels bolt to the back of your teardrop-style pallet rack to contain the load. Order to match beam width; wire panels are around 6" narrower to fit between posts. Match your panel height to the same height as your rack frame. Wire barriers can be ordered flush or offset to allow pallet overhang. Just choose and add the amount of overhang you need. "

Luke, Employee-Owner
Account Executive

Panels bolt directly to teardrop pallet rack uprights - for non-teardrop racks, consult us
Wire barriers can be ordered flush or offset to allow pallet overhang; just specify when you order flush or overhang, and the amount of overhang needed

Filter By:

Sort By:

Products per page:

Viewing Page 1 of 2

Page: 1 2 >>>

Model No.	Width	Height	Price
RW-RackBack8x8	8'	8'	$1,055.13	Qty:
RW-RackBack8x10	8'	10'	$1,154.38	Qty:
RW-RackBack8x12	8'	12'	$1,308.22	Qty:
RW-RackBack8x14	8'	14'	$1,405.86	Qty:
RW-RackBack8x16	8'	16'	$1,561.32	Qty:
RW-RackBack9x8	9'	8'	$1,098.23	Qty:
RW-RackBack9x10	9'	10'	$1,178.69	Qty:
RW-RackBack9x12	9'	12'	$1,374.48	Qty:
RW-RackBack9x14	9'	14'	$1,454.93	Qty:
RW-RackBack9x16	9'	16'	$1,649.12	Qty:
RW-RackBack10x10	10'	10'	$1,220.18	Qty:
RW-RackBack10x12	10'	12'	$1,532.32	Qty:

Model No.	Width	Height	Price
RW-RackBack8x8	8'	8'	$1,055.13	Qty:
RW-RackBack8x10	8'	10'	$1,154.38	Qty:
RW-RackBack8x12	8'	12'	$1,308.22	Qty:
RW-RackBack8x14	8'	14'	$1,405.86	Qty:
RW-RackBack8x16	8'	16'	$1,561.32	Qty:
RW-RackBack9x8	9'	8'	$1,098.23	Qty:
RW-RackBack9x10	9'	10'	$1,178.69	Qty:
RW-RackBack9x12	9'	12'	$1,374.48	Qty:
RW-RackBack9x14	9'	14'	$1,454.93	Qty:
RW-RackBack9x16	9'	16'	$1,649.12	Qty:
RW-RackBack10x10	10'	10'	$1,220.18	Qty:
RW-RackBack10x12	10'	12'	$1,532.32	Qty:

Sort By:

Products per page:

Viewing Page 1 of 2

Page: 1 2 >>>

Rack Back installs easily on "teardrop" style racks, but require different hardware for other styles of uprights

The Rack Back products shown here include mounting hardware for teardrop style pallet rack uprights. If your rack uprights are another type, contact us for pricing with the appropriate mounting hardware.

Protect Employees and Inventory

To shield your racks, wire panels are mounted directly to pallet rack as a backing system that puts a steel barrier between inventory and the picking aisles below. Mounting bracket length may vary to accommodate pallet overhang so that the panel can help prevent product and pallet spills. Once in place, the panels create a "wall of protection" for employees working near the rack or walking through pallet rack aisle ways. Hinged or sliding gates may be added to totally enclose the rack, as well as its contents.

Specifying Racking Wire Panels

Beam width between rack uprights
Upright width
Overall number of bays
Required offset dimensions from upright to panel (allows for pallet overhang)
Mounting height above floor (if not flush to floor)
Overall height of rack uprights
Desired backing height (do you need the backing to extend beyond the top beam for products stored on the top level?)

Rack wire backing drawing with dimensions labeled

Add hinged or sliding gates to the pallet rack to help secure inventory

Hinged Gate

Sliding Gate

It's simple to add extra security to your pallet rack system with hinged and sliding gates. Control access and prevent inventory theft with our pallet rack enclosures. See rack security cages for preconfigured RackBack with swinging gates for more details.

1-866-443-5648

1-866-443-5648 eMail Cisco-Eagle