Your shopping cart is currently empty.
Configurations of Safety Netting for Conveyors
Protect people and equipment from falling loads
Get Quote Safety Net Catalog - Pricing and spec information
Box-Shaped with offset
Box-Shaped with offset or flush mounting. Boxed shape guarding protects both sides and beneath the conveyor. When sides are kept close, the guarding can help keep products on the line. If mounted far enough away, product can fall clear of the conveyor for a safe catch in the netting below. Broken cases, small products and falling conveyor parts are caught on the underside, too. height should be at least two-thirds the height of the largest conveyed object.
L-Shaped Guards
L-Shaped Guards are designed for conveyor applications that run next to walls. They're supported by cable or angles that run along the overhead supports and are secured to the wall behind the conveyor.
Side Guards
Side Guards. When protection is needed on the sides of conveyors but not beneath, Side Guards can be specified. Generally they are placed flush to the conveyor without offsetting.
Catenary Curve
Catenary Curve. The catenary curve is used in special applications where other system layouts are not possible. Design considerations should be carefully reviewed for this choice.
Horizontal Guard
Horizontal Guards. These guards are used under or between multiple overhead conveyors, or elevated work platforms and mezzanines*. We suggest installing horizontal safety nets under the entire exposure.In some applications, the open outer perimeters may need side guards.
Liners for Retaining Parts
Liners for retaining small parts. We provide small mesh liners to catch nuts, bolts washers and other small items--down to 1/8". Liners are normally used in combination with standard safety nets.
Box-Shaped 90-degree Turn
Box-Shaped 180-degree Turn
90-degree and 180-degree Turns. Our safety netting can handle any shape, turn or change in elevation, including 90-degree and 180-degree turns.
We can help you find the right safety netting for your conveyor application. NOTE: Because the examples above are an engineered solution and not pre-configured kits, it may take several days to properly configure and quote. Please also note that framing is not included.