SKU: LowPro93B
Manufacturer: Unex
This is the most critical dimension involved in specifying Low Profile Span Track to fit into pallet rack. To determine the track length you need, measure between the beams from the innermost of each beam. The Between Beam Dimension represents the level, horizontal distance between the front and rear beams. Measure the level distance between the innermost part of each beam. If more than one length will fit, you should select the length that provides the most range for your application. You will need to set the discharge elevation later, based on the weight of your cartons. Unsupported spans of up to 10' are possible, depending on product weights. See the list below for a guideline. If you have questions about this dimension or other configuration issues, contact Customer Service.See our comprehensive page on specifying low profile carton flow track.
Each carton track must be ordered with two hangers: one front, one rear. Hangers to fit any rack beam are available. The front hanger acts as a front-end carton stop, and the rear hanger absorbs shock of impact loading. Both hangers have built-in label holders. If you need assistance choosing the correct hanger for your beams, contact us. See accessories to specify your hanger.More information: specifying low profile hangers.