Your shopping cart is currently empty.
E24 Live Roller Conveyor 24v - 10' long, 24" overall width
Self-contained motor modules lower cost and increase safety
SKU: 190-E24-24-10
Manufacturer: Hytrol
E24 conveyors utilize a series of brushless, gearless, low RPM 24-volt motors along each conveyor section to drive the rollers. This eliminates the necessity for drive chains, belts, and line shafts making the conveyor line much more quiet and a lot safer for technicians working with the motors. Because each motor is a self-contained module, adding more sections or drives to the line is as easy as plug-and-play.
$5,827.80
- Between Rails: 21"
- Overall Width: 24"
- Length: 10'
- Bed: Roller bed with 1.9" dia. roller x 16 ga. galvanized tube
- Bearing Spacing: Every 3"
- Bed Mounting: Set-high
- Frame: 6-1/2" x 12 ga. powder painted formed steel channel frame bolted together with splice plates
- Floor Supports: Model MS-6 with 30-3/8" to 42-3/8" adjustable height range
- Motor Life Expectancy: 125,000 hours continuous runtime
- Number of Motors: 3 per 10' section
- Capacity: 22 lbs. per foot
- Conveying Speed: 35-125 FPM, set on motor controller
- Power Supply (for motors): 40 amp DC power supply, 28 volt fixed output. Maximum of 40 motors per power supply. 120 van, 17 amp input. Mounted near center of conveyor.
- Motor: 24 VDC motor located along section on the inside of the BR on straight section only. Maximum slaved rollers is 16 per each motor
- Slave O-Rings: 3/16" dia. polyurethane o-rings slave-drive tread rollers from motor
- Motor Controller: Controls and protects motor. One per each
- Cross Bracing: Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure correct product tracking. Supplied on every other section 30 ft. bed lengths and over
- Note: Number of motors per power supply is based on the use of standard Hytrol o-rings
- Weight: 370.0 lbs. ea.
Combine Your Purchase With
Easy to implement, maintain, and operate
- Safe, 24 VDC operation reduces risks to maintenance and operators
- Substantially quieter operation
- Energy efficient motors and logic
- Modular design is easily configurable
- Plug and play for quick setup
- Minimal maintenance
- Extended motor life 8-10 times conventional rollers
- Significant space savings
- Absolute product control with self-contained module controllers
- Easily integrated with PC's or PLC's
Better for the environment
In the case of E24, we're talking about energy savings as high as 60%. But then we get into raw materials savings: An E24 conveyor lasts about 6 times as long as a conventional roller at 125,000 hours life expectancy (24/7 runtime). That's less steel and power used to manufacture it.
E24EZ conveyors have a built-in controller that allows the conveyors to enter an energy-saving "sleep mode" for the ultimate in quiet, efficient, sustainable powered roller conveyor. Because the conveyor can use one motor for all widths, it's excellent for reducing needs for specialized, energy-consuming motors. With 3 moving parts, there are many fewer opportunities for parts failure, and the inefficiency that comes with it.
- E24™ Capabilities Brochure (953 KB PDF, opens in new window)
- Specifications (412 KB PDF, opens in new window)
- Installation and Maintenance Manual (4.8MB PDF, opens in new window)
Lead Time: 2 weeks + transit time
Contact Cisco-Eagle to get a Shipping Rate for this item
