A laser fork guidance system made for cold storage use helps to visually guide forklift drivers as they pick or store pallets, significantly reducing the chances of tines breaking open bags, punching holes in cartons and damaging the goods inside. This laser light aligns with the fork tines and shines on the pallet in front of the forklift, providing a guide line that shows the forklift operator the position of the tines at all times. This also speeds the rate of pulling pallets out of pallet rack. Fits Class 2 carriages.
Voltage regulator direct wires to forklift electrical system and converts power to 6 VDC. Powers on when the forklift powers on. You must have an existing power supply available at the carriage as this system does not include the hardware to establish one, only connect to one. If no power supply is available, please select a battery operated guide system. All sales of this item are final.
Directly wired voltage regulator converts the forklift electrical power to 6 VDC. No batteries to keep charged. Operates using forklift electrical power.
Requires 12-55 DC voltage available at the carriage and includes a 19" pigtail wire. Laser system does not include the material to establish a power source at the carriage (reels, wiring harness, etc.) If power is not already available, please order a battery powered guidance system. Alternately, you may contact the forklift manufacturer for the necessary hardware to bring power to the carriage.
Laser unit activates on key switch; it starts up when the forklift powers on and turns off when the forklift powers down.
Unit is sealed for use in low-temperature and high-moisture conditions (cold storage).
Single laser aids operator in positioning forklift tines at the correct placement before attempting to enter the pallet's fork slots. Helps prevent damage to pallets and especially to palletized goods.
For Class 2 carriage types. Class 3 & 4 models also available online. Please call to request products to fit other carriage types