SKU: W168H
Manufacturer: WireCrafters
A wire mesh security partition prevents pilferage, encloses work areas, and creates customized, accessible security areas in warehouses, manufacturing facilities, distribution centers, tool cribs, and other work areas. It gives you control of who has access to valuable inventory. The hardware is inaccessible from the exterior, so it can't be easily disassembled from outside the cage. Installation is fast because the design uses a minimum of parts. Panels install horizontally between 14-gauge tubular posts. The panels are steel wire woven into 2" x 1" rectangular mesh and securely welded to a 1-1/4" x 1-1/4" x 3/16" steel angle frame. Doors include cylinder key locks, other lock options are available.
Some assembly required on locking components and some accessories. Universal construction allows for left or right configuration of the door, with inside or outside swing.
Download Architectural Specifications:
Use one-sided partitions to enclose an area by anchoring it against two facing walls or building columns to create a secure wire wall. This partition can also be used at the end of rack rows or in other areas to create a single-wall barrier. This partition ships with posts at each end for panel connection, so it does not need to connect directly to facility walls.
Gate:3' wide single-hinged gate is 7’3¾” tall with a transom panel on top sized to match overall partition height. Includes three 4” x 4” 10-gauge tight pin hinges, key lock, door posts, and all hardware. It is constructed to work on the left or right hand side, and to swing inside or outside of the partition.
Footplates: Standard footplates are 2" x 7". They extend outside the post by 2½” per post position depending on footplate orientation. If you are in a seismic zone, or your floor is not smooth or even, a larger footplate may be required.
Partitions are designed to be anchored into a concrete floor. If your floor is uneven, or a surface that cannot hold anchors, contact us. Partitions can be installed on most any floor that can bear their weight, but there may be considerations with various floor surfaces. Contact us for assistance.
Finished in gray acrylic enamel. Available with gray powder coat finish upon request at no extra cost (may extend lead time). Other colors are also available in powder coat for an additional fee; contact us for more information.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information – www.p65warnings.ca.gov.
Lead Time: 1-2 weeks + transit time
Contact Cisco-Eagle to get a Shipping Rate for this item