Phenolic Wheels are molded from prime phenolic resin compounds with maximum density and strength. Phenolic wheels are constructed from a special water resistant compound that provides excellent service even in wet and cold applications. In addition, Phenolic wheels resist degradation, deterioration, and corrosion from oil, grease, and commonly used acids and solvents. Recommended for all types of floors except resilient tiles. Phenolic wheels should not be towed at high speeds or used on poor floors. They are often referred to as Durastan wheels. Temperature range: -65 degrees F to 275 degrees F continuous; 300 degrees F intermittent.
There is a minimum order requirement of $150 on this item.
Raceway Design:
Patented Kingpinless™ single ball bearing precision machined raceway hardened to 53 Rockwell C minimum. Swivel section features a 3" diameter raceway with 1/2" ball bearings. The notched yoke is standard.
Wheels:
3/4" I.D. roller bearings that are prelubricated and rotate on individual spanner bushings or annular ball bearings
Finish:
Laguna Blue paint
Axle:
1/2" bolt, locking nut and lubrication fittings
Mounting Plate Size:
4-1/2" x 6-1/2" x 5/16"
Bolt Hole Spacing:
2-7/16" x 4-15/16", slotted to 3-3/8" x 5-1/4"
Temperature range:
-65 to 275 degrees F continuously, 300 degrees F intermittently
Leg Thickness:
5/16" formed steel. Center leg support is added for increased strength
Mounting Bolt Diameter:
1/2"
Bores:
Special sizes available upon request
Lubrication:
Fittings standard on 2-1/2" and wider wheels