Phenolic Wheels are molded from prime phenolic resin compounds with maximum density and strength. Phenolic wheels are constructed from a special water resistant compound that provides excellent service even in wet and cold applications. In addition, Phenolic wheels resist degradation, deterioration, and corrosion from oil, grease, and commonly used acids and solvents. Recommended for all types of floors except resilient tiles. Phenolic wheels should not be towed at high speeds or used on poor floors. They are often referred to as Durastan wheels. Temperature range: -65 degrees F to 275 degrees F continuous; 300 degrees F intermittent.
Raceway Design:
Patented Kingpinless™ single ball bearing precision machined raceway hardened to 53 Rockwell C minimum. Swivel section features a 3" diameter raceway with 1/2" ball bearings. Notched yoke is standard.
Wheels:
Available with either 1" roller bearings which rotate on hardened and ground spanner bushings or 3/4" tapered bearings that rotate on the axle
Finish:
Laguna Blue paint
Axle:
3/4" bolt with locking or slotted nut as required
Mounting Plate Size:
5-1/4" x 7-1/4" x 3/8"
Bolt Hole Spacing:
3-3/8" x 5-1/4", slotted to 4-1/8" x 6-1/8"
Mounting Bolt Diameter:
1/2"
Leg Thickness:
3/8"
Temperature range:
-65 to 275 degrees F continuously, 300 degrees F intermittently