65" Bumper Post Sleeve for 6" diameter post

• Post Diameter:  6" to 6-5/8"
• Height to Witness Line:  65"
• Construction:  LDPE
• Overall Height:  68" including dome top
• Material:  Thermoplastic polyethylene with ultra-violet and anti-static additives
• Installation:  Installs with neoprene adhesive tape (included)
• Weight: 14.0 lbs. ea.

Low density polyethylene thermoplastic (LDPE) molded sleeves slide over existing guard post. The LDPE mold mixture contains ultraviolet and anti-static additives to help prevent fading and make clean up easier. The finished bumper post sleeves are chemical resistant, durable and withstand temperature extremes.

How to specify your bumper post protector:

1. Measure the circumference you want to cover. (Circumference is the distance around the post.) Most posts are either 4" or 6".
2. Take that dimension and divide by pi (3.14) to receive the pipe size. Example:
   • Circumference is 21.5". Divide by 3.14. (21.5/3.14 = 6.8471)
   • Pipe size is 6-7/8"
3. The bumper post sleeve needed is 6". Always round down.
4. Height: utilize the height of the actual post. Space is built in for the sleeve's dome top, so the relevant measurement is the height of the bollard or post from ground to top.
5. If you need help, contact us. If you don't see a size to match your bollards, contact us for assistance.

• Bollard Cover Flyer (1.83 MB PDF, opens in new window)
• Color Chart (4.21 MB PDF, opens in new window)
• Installation Guide (1.42 MB PDF, opens in new window)
• Specifications & Size Guide (819 KB PDF, opens in new window)
• Bollard Sleeve Testing (379 KB PDF, opens in new window)
• Bollard Cover Measuring Tool (123 KB PDF, opens in new window)

Lead Time: 3 to 5 days + transit time

Contact Cisco-Eagle to get a Shipping Rate for this item