SKU: RW-66088
Manufacturer: WireCrafters
Wire mesh security partitions prevent pilferage, enclose work areas, and create customized, accessible security areas in warehouses, manufacturing facilities, distribution centers, tool cribs, and other work areas. They give you control of who has access to valuable inventory. Enclosures install against any existing straight wall, using two wire panel walls and two building walls to enclose area. Hardware is inaccessible from the exterior, and can't be easily disassembled from outside the cage. Panels are constructed of 10 gauge wire welded into high-strength 2" x 2" center to center square mesh and secured to a 1-1/4" x 1-1/4" steel 13 gauge roll form angle frame on all four sides for complete security. Create continuous rows of connected cages along any wall with this design. Installation is fast because the design uses a minimum of parts. If you are attaching the partition to the wall and not to a shared post of another partition, you must order an additional post for each panel that will be attached to the wall. These can be found in the accessories section below. Doors include cylinder key locks, other lock options are available.
Some assembly required on locking components and some accessories. Universal construction allows for left or right configuration of the door, with inside or outside swing.
Installation: Because of it's modular design and fastening system, welded wire partitions can be installed in less time that similar woven wire partitioning. It's also extremely versatile if having to make alterations or modifications in the field. Sometimes obstructions such as piping or other permanent structures can get in the way of where you need to place the partition. Because each wire connection on the panel is welded, you can cut holes in the panel to accommodate for the obstruction without losing the structural integrity of the panel without having to re-weld. You can't do that with woven wire!
Gate: 3' wide single-hinged gate is 7'3¾" tall with a transom panel on top sized to match overall partition height. Includes three 4" x 4" 10-gauge tight pin hinges, key lock, door posts, and all hardware. It is constructed to work on the left or right hand side, and to swing inside or outside of the partition. 2-sided structure: Two-wall wire enclosure unit is designed to fit into corners utilizing two existing walls and two wire panel walls to enclose the area. Cages have a 3-1/4" sweep space between the panel bottom and the floor. The end walls must be attached to an existing wall, and are not freestanding (wall anchoring not included).
Important note: Your facility wall must be able to accommodate wall or ceiling panels to utilize this model. At-wall post connections may be required in some circumstances. Posts at the wall are recommended for dry wall, gypsum, or metal walls. Panels may connect directly to masonry, block, and certain wood walls. Adding posts at the wall will increase the price and weight of your unit. If you are not certain that your wall construction can be utilized to anchor panels, contact us for assistance.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information – www.p65warnings.ca.gov.
Lead Time: 1-2 weeks + transit time
Contact Cisco-Eagle to get a Shipping Rate for this item