Call Today!

1-866-443-5648

0 0

Quote

2-Wall Woven Wire Security Cage, No Ceiling, 16'4" x 8'2" x 8'5-1/4" with 3' Hinged Gate

Stop pilferage, enclose valuable inventory, and create accessible security areas - wire security cages give you security anywhere you need it

View Larger Image

View More Images

SKU: 66089

Manufacturer: WireCrafters

Two-Wall Partitions are installed into a corner, providing a secure area utilizing two building walls and two wire mesh walls. This creates a space-efficient cage that you can either anchor to the walls (if the material is appropriate) or to posts. Partitions are built with high-strength 2" x 1" woven steel wire mesh welded to a 1-1/4" x 1-1/4" angle frame for complete security. If you are attaching the partition to the wall and not to a shared post of another partition, you must order an additional post for each panel that will be attached to the wall. These can be found in the accessories section below. Doors include cylinder key locks, other lock options are available.

Some assembly required on locking components and some accessories. Universal construction allows for left or right configuration of the door, with inside or outside swing.

$2,772.24

Inquire

Accessories

Combine Your Purchase With

Door Push Bar

$919.42

Qty:

Coded Card Reader

$2,133.10

Qty:

5-Button Coded Access Lock

$1,300.71

Qty:

Dead-Bolt Lock

$1,616.60

Qty:

Electric Strike Lock

$809.29

Qty:

2"W x 8' 5-1/4"H Post

$119.19

Qty:

Biometric Reader - Hinged Door

$2,218.47

Qty:

10-Digit Keypad

$407.88

Qty:

Specifications

Type: Woven
Configuration: 2-wall
Height: 8'5-1/4"
Nominal Footprint: 16'W x 8'D
Gate: 3' hinged gate
Ceiling: No
Finish: Gray acrylic enamel
Width x Depth: 16'4"W x 8'2"D
Weight: 739.5 lbs. ea.

Download Architectural Specifications:

Images

Click on the thumbnails to see a larger image below.

4-wall wire security cage with ceiling.

Description

A wire mesh security cage prevents pilferage, encloses work areas, and creates customized, accessible security areas in warehouses, manufacturing facilities, and distribution centers. It gives you control of who has access to valuable stock.

Partitions are assembled with durable 3/8" hardware.
Hardware is not accessible from the exterior.
Double-tough construction provides unequaled strength and security.
Installation is fast because the design uses fewer total parts.
Panels install horizontally between 14-gauge tubular posts. They are steel wire woven into 2" x 1" rectangular mesh and securely welded to a 1¼" x 1¼" x 3/16" steel angle frame.
Listed dimensions reflect exterior size; enclosed dimensions are slightly smaller.
Standard footplates are 2" x 7". They extend outside the post by 2½" per corner post position depending on footplate orientation. They will slightly increase overall dimensions.
If you are in a seismic zone, or your floor is not smooth or even, a larger footplate may be required.
If overall dimensions are extremely critical to your project, contact us for assistance. We can calculate the precise size of your enclosure in advance.
Finish: Gray acrylic enamel. Available with gray powder coat finish upon request at no extra cost (may extend lead time). Other colors are also available in powder coat for an additional fee; contact us for more information.

Gate: 3' wide single-hinged gate is 7'3¾" tall with a transom panel on top sized to match overall partition height. Includes three 4" x 4" 10-gauge tight pin hinges, key lock, door posts, and all hardware. It is constructed to work on the left or right hand side, and to swing inside or outside of the partition.

2-sided structure: Two-wall wire enclosure unit is designed to fit into corners utilizing two existing walls and two wire panel walls to enclose the area. Cages have a 3-1/4" sweep space between the panel bottom and the floor. The end walls must be attached to an existing wall, and are not freestanding (wall anchoring not included).

Important note: Your facility wall must be able to accommodate wall or ceiling panels to utilize this model. At-wall post connections may be required in some circumstances. Posts at the wall are recommended for dry wall, gypsum, or metal walls. Panels may connect directly to masonry, block, and certain wood walls. Adding posts at the wall will increase the price and weight of your unit. If you are not certain that your wall construction can be utilized to anchor panels, contact us for assistance.

Ceiling not included. This is an open-topped security partition. You can order models with a fully-enclosed wire mesh ceiling.

California Proposition 65

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information – www.p65warnings.ca.gov.