Slider Bed Belt Conveyor: Hytrol Model SB

Easily create longer runs of belt conveyor

• Bed is constructed of 12-gauge formed steel with powder coat finish
• Roller ends allow sections to be bolted together easily
• Reversible center drive
• Specify belting, drive, motor, support height, and guard rails
• Electrical controls not included

The Model SB is a slider bed conveyor designed with channel frames and bolt in pans. Frame design makes it ideal for matching up with roller bed conveyors. Model SB slider bed conveyors have a channeled frame equipped with a single transition roller on the end of the conveyor bed. By having a belt slightly shorter than the frame, and adding the roller on the end, this conveyor is able to bolt directly to other conveyor frames. This built-in transition makes it easier for you to create long runs of conveyor without having to re-size belts or add additional intermediate transition sections. Also standard on the Model SB is a center drive, making the conveyor direction reversible at no extra cost.

• Model SB Conveyor Specifications 573 KB PDF, opens a new window

• Bed: 6-1/2" deep x 12 ga. formed steel channel; powder painted
• Center drive standard; this conveyor is reversible
• Motor: 1 HP standard, 2 HP available
• Guard rails and adjustable floor supports available
• Travel speed of 65 feet per minute