Dual "S" Curve Horizontal Offset Conveyors

• 6 belt widths available for a variety of applications
• Choose between 30-, 45-, and 90-degree curves (each curve has the same angle)
• Speed range of 5 to 75 feet per minute (1.5 to 22.9 meters per minute). Custom speed ranges available
• Increased load carrying capacity over a belt style conveyor
• Durable acetal chain provides long life, is completely self-tracking, and is nearly silent running
• The HO-Series chain has a 22% open area. This allows debris to more easily pass through the conveyor chain
• 2-piece drive and idler sprockets for ease of replacement without shaft removal
• Non-corroding stainless steel drive shaft and idler shaft
• Non-corroding stainless steel fasteners
• Nominal top of chain ranges from 22 inches (558.8mm) to 84 inches (2133mm).
• SpanLon wear strip and center support rails provide longwearing, silent operation
• There are no "take ups" with Span Tech conveyors, as you have with belt conveyors

HO-PLN Plastic Chain Offset Curve Conveyor

The Span Tech HO-PLN horizontal offset conveyor with plain chain is ideal for transporting packaged items around a curving layout. The tight knit of the chain lattice provides a smooth base for large or small products and offers the tightest turning radius in the industry. The chain can support products down to 1 inch (25.4mm). If a Gravity Transfer is used, the minimum product size is 4.5" (114.3mm). The transfer is set to a decline angle of approximately 6°.

HO-RAS Offset Curve Conveyors

Span Tech HO-RAS raised chain horizontal offset conveyor with a Finger Transfer can transfer products as small as 1.5 inches (38.1mm) in diameter. The transfer is set to a decline angle of approximately 10°. Raised top chain can also be used to reduce the amount of contact between the chain and the product, increasing airflow. Excellent for delicate packaging, small product, and end-to-end transfer applications.

HO-MSG Plastic Chain Offset Curve Conveyors

The Span Tech HO-MSG horizontal offset conveyor features 75mm left and right guides molded into the side links. This feature provides positive retention of products during transportation. Use this type of chain where the product you are moving might get tangled in conventional guide rails. Gravity Transfers are not available with this type of chain.