The folks at the Material Handling Institute of America have thrown all of last year’s ProMat sessions in Podcast/Webcast form onto their website, for free. This presentation is intriguing – who doesn’t want to save a hundred grand? It’s presented by Louis J. Cerny, Vice President of Sedlak, and lasts about 37 minutes; it’s easy to listen to in the background if you don’t feel the need to watch the slide presentation.

Read the rest of this entry »

E24 Powered Roller Conveyor from Hytrol has become very popular with conveyor users due to its advantages over conventional conveyor and motorized rollers.  This quiet, energy-efficient conveyor fits the green mode that many operations are following, and can deliver exceptional flexibility, superb heat dissipation, and a robustness that cannot be achieved with motors embedded in conveyor rollers.

Below are two examples of  creative application of E24 technology…

Read the rest of this entry »

This is a great video from WorkSafeBC on how to prevent forklift injuries from a pedestrian’s point of view.

As a pedestrian in a forklift environment, it’s your responsibility to keep yourself safe.  Anyone who runs a warehouse or industrial facility understands the dangers, and drivers should be trained. But do you train the pedestrians, the order pickers, the managers, and vendors who sometimes roam your facility?

Read the rest of this entry »

If you’ve ever stopped at a traffic light, and shuddered at the texting, teenage driver in the next lane, you probably thought this is an irresponsible person who shouldn’t be behind the wheel. Given statistics that texters are about as impaired as drunk drivers, it’s a real issue. The question is, do you tolerate that kind of distractions for forklift drivers in your warehouse?

Read the rest of this entry »

We sell loads of shelving all over the country, and one of the persistent issues is the cost of shipping. In particular, that’s an issue for industrial rivet shelving, which is the most economical type of shelving with the highest capacity. It is easily the most popular industrial shelf type going. For many customers, shipping an all inclusive shelving system is the easiest, most convenient thing — we do it all the time.

Read the rest of this entry »

Cliff Holste at Supply Chain Digest (opens in a new window) has a good piece on ways to improve picking productivity.

Distribution centers will benefit from emerging automated case picking technologies, but those don’t fit for every operation, at every level. They’re also expensive upgrades, so your ROI has to be considered as well.

Read the rest of this entry »

Talk about your ounce of prevention pound of cure scenario…

This forklift accident illustrates the importance of properly protecting the ends of pallet rack rows. The driver didn’t have much room to accelerate, but didn’t need much velocity to hit the rack hard enough to compromise the upright and start a domino effect that destroyed hundreds of thousands of dollars of alcohol (this was a Russian company, but forklift damage knows no national boundaries) and endangered warehouse employees. Utilizing bollards, steel guard rails, or upright rack frame post protectors might have prevented it.

It may also stress the importance of specifying sufficiently collision-resistant racks, such as heavy duty high-strength structural racks or totally-enclosed tubular uprights. Rack is often seen as a “stack it high” commodity, but in situations like that video, the value of correct specification and safety measures are underlined. If you have damaged uprights or unprotected rack columns, watch the video. And then get it fixed.

Push back rack systems are excellent high density storage solutions — perhaps the most economical way to squeeze space out of a crowded warehouse.  All loads are stored and retrieved from the same aisle. This reduces the number of aisles needed in a facility, freeing up more space for storage. Aisles can take a great deal of space up in a typical warehouse, so by implementing a pushback pallet rack system, you essentially swap selectivity for space. Push back rack systems provide a Last-In-First-Out (LIFO) inventory rotation, so you have to be certain your load fits. If it does, congratulations — you’ve just saved a lot of space. But there are issues that can arise when pushback rack is inappropriately specified or utilized. Here are some of those…

Read the rest of this entry »

It ought to be fairly simple, but specifying the right workbench for your application is something that deserves thought and pre-planning. Minor differences in the type of bench can provide critical benefits that add up to major productivity gains over time. Benches aren’t the simple, static equipment many believe. Here are some traits to consider

Application: A clear, flat surface is the basis for most workstations. The bigger question is this: how will it be used? Will you be packing orders? Repairing or assembling? Will it integrate with conveyors or assembly lines? Will you need access to certain supplies? Ergonomic considerations will play heavily into this part of the decision making process.

Read the rest of this entry »

Environmental awareness, sustainability, ‘green’ or carbon foot printing, no matter what term you use today, everyone and every facility is aware that their processes need improving.

Whether you are in pharmaceutical, beverage, food, automotive, distribution, manufacturing or thousands of other industries today, there has to be some way to track and/or reuse what is not used within your daily operations. Many progressive industries are designing internal reclamation processes for utilization and recycling of goods they don’t need or are waste.

This white paper (PDF, opens a new window) explains various methods for removing refuse from your facility in a more organized, more controlled manner by utilizing conveyors.