Material Handling Experts

888-877-3861

Information on the products and techniques to better store, handle, and move products in your facility.

Seismic Zones and Pallet Rack: An Evolving Situation

August 12, 2015

2015-manufacturing

Is your facility in a seismic zone? Are you sure?

An increasing number of areas across the United States are demonstrating geological stresses and increased fault pressures that lead to earthquakes and smaller seismic events. So much more that our national seismic map was recently updated to include areas of the northeast and southern tier states not previously known for earthquakes, as well as enhanced zone classification in the inter-mountain west and known fault areas. Are you sure your pallet rack is correctly configured to withstand seismic ground forces?

Read the rest of this entry »

Tags: , , , , , , , , ,
Posted in Material Handling, Pallet Rack, Safety & Ergonomics, Warehousing| No Comments »

A Guide to Pallet Rack Wire Decking Finishes

April 3, 2013

wire decking for pallet rack

There’s a lot of confusion about the different finishes that can be applied to a pallet rack wire deck. Various manufacturers offer different finishes, and you may have need of more than one of them for different types of storage applications. Nashville Wire, our rack decking supplier, has sent us this super-basic primer on the common finish options.

Read the rest of this entry »

Tags: , ,
Posted in Pallet Rack, Warehousing| No Comments »

Pallet Rack Wire Decking: Calculating Gauges and Capacity

December 7, 2010

Wire gauge is a crucial element in wire pallet rack deck design and is also one of the first places manufacturers look to when needing to cut costs, meaning it’s one of the first places you should look when comparing decking for your pallet rack project. Lower cost is great, but only if you’re getting the capacity and durability you need.

Just because two decks are the same size in no way makes them the same deck. That can be all right, so long as both can hold your load and last for the long term.

Read the rest of this entry »

Tags: , ,
Posted in Manufacturing, Material Handling, Order Picking & Fulfillment, Pallet Rack, Safety & Ergonomics, Warehousing| No Comments »

RMI Announces R-Mark for Welded Wire Rack Decking

February 11, 2009

pallet rack with wire decking

The Material Handling Industry of America recently announced that the RMI (Rack Manufacturers Institute) has certified several manufacturers of wire rack decking “R-Mark” compliant, meaning that these companies have conformed to the Institute’s testing and utilization standards. The industry developed the latest and most comprehensive consensus documents ANSI MH16.1 – 2008 – Specification for the Design, Testing and Utilization of Industrial Steel Storage Racks and MH26.2 – 2007  – Specification for the Design, Testing and Utilization of Welded Wire Rack Decking. Members of RMI voluntarily choose to conform to ANSI MH16.1 – 2008 and MH26.2 – 2007 and any successor document(s).

Read the rest of this entry »

Tags: , , , , ,
Posted in Industrial Shelving, Manufacturing, Material Handling, Pallet Rack, Safety & Ergonomics, Supply Chain, Warehousing| No Comments »

Rack Manufacturers Institute Releases 2007 Wire Decking Standards

January 9, 2008

wire decking for pallet racks

Wire decking is ubiquitous with selective pallet rack–it’s perhaps the most broadly-specified selective rack accessory. People use it to when they want pallet support with greater structural strength than other materials, when they want to load boxes or other non-palletized load onto racks, when they want to handle loads that aren’t deep enough to sit on uprights, and when they want to eliminate dust and debris inherent with solid decking materials…

Read the rest of this entry »

Tags: , , , , ,
Posted in Material Handling, News, Pallet Rack, Safety & Ergonomics, Warehousing| No Comments »