rack | Warehousing Insights | Material Handling Systems - Part 32
Cisco-Eagle Logo
Blog Home > rack

Ways to Enhance Training to Protect Pedestrians from Forklifts

October 23, 2012
by

manager in a warehouse forklift area between rack aisles

According to OSHA, training is the key to forklift safety, and there is fundamental agreement on that. Training can and does make a serious dent in the high injury rates suffered due to industrial traffic. Training must happen, and it must be repeated. But that begs this question: Why has training failed to move the needle when it comes to serious forklift related injuries? The numbers seem to have stabilized at an average of 100 deaths per year, and have stayed consistently at that level for years.

Read the rest of this entry »

Tags: , , ,
Posted in Forklift - Pedestrian Safety|

What Does It Cost to Store a Pallet in Third-Party Storage

September 24, 2012
by

If you’re paying someone to store a pallet for you, what’s reasonable?

Are you overpaying for convenience or location? It’s not easy to compare 3PL vs. 3PL, or even your own warehouse so you know for sure if you are getting value for your money. But there are some basic assumptions you can make to help you understand what you’re dealing with, the costs the 3PL may experience, and reasonable costs for your storage projects.

Read the rest of this entry »

Tags: , , , , , ,
Posted in Warehousing & Distribution|

5 Sheet Metal Storage Alternatives

September 18, 2012
by

sheet metal in a production facility

Above: how difficult is it to access these sheets?

Sheet metal is one of the most difficult handling challenges out there. It’s simultaneously bulky, heavy, somewhat flexible and prone to damage if handled incorrectly. It often has sharp edges and corners, making it dangerous to manually move and turn. At higher gauges or in bundles, it requires forklifts, cranes or scissor lifts for safe and effective handling. Even a thin sheet, if it’s 4 x 8, can be too much for a single worker to handle.

Yet, sheet metal is commonly used in manufacturing and fabrication, so finding better sheet metal storage and handling methods is key. What can you do to handle it better?

Read the rest of this entry »

Tags: , ,
Posted in Pallet & Warehouse Racks|

Seeing Around Corners: The Danger Spots in Warehouses & Factories

August 28, 2012
by

pallet rack row end and forklift traffic

In an industrial environment, intersections can be dangerous. With fast-moving workers who are busy and probably distracted, and fast-moving forklifts that may have loads elevated that can obstruct the driver’s view, corners, ends of rack rows, and intersections can be the cause of many accidents. Whether it’s a worker walking and carrying a load, or a forklift on its way to the next pick, the chances of collisions, injuries, and damages are greater at intersections than most anywhere else. What are your options when it comes to making your intersections safer?

Read the rest of this entry »

Tags: , , , , , ,
Posted in Forklift - Pedestrian Safety|

10 Ways to Reduce Inventory Errors Through Order Picking

June 25, 2012
by

checking inventory at a warehouse

Mistakes happen, but in order picking operations, reducing the number of errors is critical. Because order picking is the last touch point between you and your customers, it’s more important than public relations, press releases, or your website. Whether you’re shipping direct to consumers or to another processing operation, customers are directly impacted. Not only is the customer with the incorrect order harmed, so are potential future customers who suffer because of inventory errors delaying orders.

What are some ways you can increase inventory accuracy related to order picking?

Read the rest of this entry »

Tags:
Posted in Order Picking & Fulfillment|

How to Store Stacks of Empty Pallets

May 4, 2012
by

pallet stacks

Most distribution and manufacturing operations deal with empty pallets. Sometimes, a lot of them.

Empty pallets take space you could use for something else as they clutter your receiving area. Sometimes they’re splintery, with nails protruding from the sides ready to bite a passerby. People re-use their pallets, holding onto them for a period of time until they’re used for an outbound shipment. But while they’re in your facility, they can eat space, potentially injure people, and generally cause trouble.

Read the rest of this entry »

Posted in Safety & Ergonomics|

Vertical Lift Modules vs. Horizontal Carousels

May 2, 2012
by

Horizontal Carousels vs. Verticla Lift Modules

When you are considering an automated picking solution, you have lots of choices. One of the more frequent comparisons is between horizontal carousels and VLM’s – vertical lift modules. Both promise similar efficiency gains: they bring products to pickers rather forcing pickers to move to picking stations in shelving or racks. But which is best? That depends on what set of criteria you use, and what’s important to you.

Read the rest of this entry »

Tags: , ,
Posted in Automation, Labor & Efficiency|

OSHA, Whistleblowers, and Safety Bonuses

April 9, 2012
by

carrying cartons in a warehouse, wearing safety vest

OSHA has recently released a guide to safety incentives, disincentives, and reporting issues. It’s worth a quick read if you manage a manufacturing, warehousing, or industrial facility.

This document focuses on reporting/non-reporting workplace injury issues. OSHA says that “Reporting a work-related injury or illness is a core employee right, and retaliating against a worker for reporting an injury or illness is illegal discrimination under section 11(c).”  Of course, smart companies want to know if there are unsafe conditions or practices. But what if your safety rewards program is discouraging employees from reporting incidents, or even near-misses?

Read the rest of this entry »

Tags: , , , ,
Posted in Safety & Ergonomics|

How to Benchmark Your Warehouse

March 26, 2012
by

warehousing operation

Comparison is natural – and necessary

Everyone likes to see how they’re doing vs. their industry peers.  This isn’t just a natural urge to compare yourself, it’s a vital part of doing business.

Benchmarking, at the heart of it, is comparing your performance to others like you. You look at your business processes and outcomes, and how they stack up to the performance metrics of industry leaders, your peers, and the best from similar operations. In warehousing, it is particularly important to understand where you are, and where you could be with reconfigurations, tweaks, and innovations that others are using to improve their numbers.  What do you specifically measure? Typically this can include quality, cost, and time. Specifically, it can get much more complex.

At the end it helps you understand the success of your peers and how you can reproduce that success.

Read the rest of this entry »

Tags:
Posted in Warehousing & Distribution|

9 Ways to Reduce Product Damage in Your Warehouse

February 16, 2012
by

crushed box

In warehouse & manufacturing operations, things get broken. They break in a number of ways, and it’s expensive. You’ve probably seen product broken or damaged in amazing and improbable ways  if you’ve been in this business for any length of time. We had a client once buy a bunch of mismatched, used industrial shelving (not from us), only to see it collapse and dump thousands of tiny aircraft components on the floor. It had to be swept up and discarded since it was all mixed up and visually impossible to sort.

Those are extraordinary examples, but everyday inventory damage that cost “only” a few hundred or thousand dollars can savage your bottom line.

Read the rest of this entry »

Tags: , , , ,
Posted in Warehousing & Distribution|

Read our customer reviews