warehouse | Warehousing Insights | Material Handling Systems - Part 42
Cisco-Eagle Logo
Blog Home > warehouse

5 Sheet Metal Storage Alternatives

September 18, 2012
by

sheet metal in a production facility

Above: how difficult is it to access these sheets?

Sheet metal is one of the most difficult handling challenges out there. It’s simultaneously bulky, heavy, somewhat flexible and prone to damage if handled incorrectly. It often has sharp edges and corners, making it dangerous to manually move and turn. At higher gauges or in bundles, it requires forklifts, cranes or scissor lifts for safe and effective handling. Even a thin sheet, if it’s 4 x 8, can be too much for a single worker to handle.

Yet, sheet metal is commonly used in manufacturing and fabrication, so finding better sheet metal storage and handling methods is key. What can you do to handle it better?

Read the rest of this entry »

Tags: , ,
Posted in Pallet & Warehouse Racks|

Tips to Prevent and Reduce Pallet Rack Damage

September 14, 2012
by

damaged rack post

Pallet racks are frequently subject to abuse, and even the toughest rack will need some cautious handling, processes, guarding equipment, and other help to remain in service. Racks can be overloaded, hit by heavy forklifts, misloaded, and otherwise impacted. Read our quick tips to help you avoid the frustration, expense, and danger of rack damage.

Read the rest of this entry »

Posted in Pallet & Warehouse Racks|

How to Avoid Loading Dock Injuries

August 3, 2012
by

loading dock with forklifts moving

Since 25% of all warehouse injuries occur at the loading dock, warehousing and manufacturing operations need to pay close attention to this area. Shipping and receiving docks both suffer similar problems in that they are bustling places. At peak times they can get very busy, and when people are pressed for time, they become careless. So, what are the common injury types, and what can you do to avoid them?

Read the rest of this entry »

Tags: , , ,
Posted in Docks & Shipping|

Factors for Distribution Center Sustainability

July 18, 2012
by

distribution center conveyor system

At Modex 2012, Hytrol Conveyor’s Boyce Bonham sat down with DCVelocity to discuss distribution center sustainability. We’ve linked the video below, which is worth a few moments of your time. How do initiatives to work greener, smarter, and better affect warehouses and distribution operations? Not surprisingly, these initiatives often save money, at least over the long term.

Read the rest of this entry »

Tags:
Posted in Warehousing & Distribution|

10 Ways to Reduce Inventory Errors Through Order Picking

June 25, 2012
by

checking inventory at a warehouse

Mistakes happen, but in order picking operations, reducing the number of errors is critical. Because order picking is the last touch point between you and your customers, it’s more important than public relations, press releases, or your website. Whether you’re shipping direct to consumers or to another processing operation, customers are directly impacted. Not only is the customer with the incorrect order harmed, so are potential future customers who suffer because of inventory errors delaying orders.

What are some ways you can increase inventory accuracy related to order picking?

Read the rest of this entry »

Tags:
Posted in Order Picking & Fulfillment|

Protecting Order Pickers in Rack Aisles

June 22, 2012
by

Picking orders in a pallet rack aisle

“We need help before someone gets hurt”

The situation is familiar: in a busy warehouse or distribution center, you can have dozens or hundreds of order pickers that walk the floor with carts and clipboards or scan guns to pick orders for shipping. These are usually focused people who have the job in mind. After all, you’ve probably told them how speed is of the essence – which it is. The problem is that in many or most operations, there are also forklifts, walkies, or electric powered jacks operating in the same space, often in tightly spaced pallet rack aisles.

And guess what? The guys driving those forklifts are busy and focused on the job, too. It’s almost assured that if you have this situation, you’ve had accidents, or near-accidents — which you may never hear of, until the near-miss isn’t a miss at all.

Read the rest of this entry »

Posted in Safety & Ergonomics|

Securing High Value Inventory on Pallet Racks

May 17, 2012
by

pallet rack aisle

It’s always difficult to secure high-value inventory in the warehouse, and it’s even harder when the load resides in pallet racks, which are larger, have a conventionally open design, and more difficult to secure than inventory that sits on shelves or in carousels or within tool cribs.  Pallet rack loads can be palletized or stacked on decking, but either way they are more “open” than other types of inventory.  What are your alternatives?

  1. Use upper bays to keep it out of reach.
  2. Utilize secure aisles.
  3. Store it in a separate area/facility.
  4. Utilize rack-mounted security cages.
  5. Utilize solid-side rack security enclosures.

Read the rest of this entry »

Posted in Pallet & Warehouse Racks|

How to Store Stacks of Empty Pallets

May 4, 2012
by

pallet stacks

Most distribution and manufacturing operations deal with empty pallets. Sometimes, a lot of them.

Empty pallets take space you could use for something else as they clutter your receiving area. Sometimes they’re splintery, with nails protruding from the sides ready to bite a passerby. People re-use their pallets, holding onto them for a period of time until they’re used for an outbound shipment. But while they’re in your facility, they can eat space, potentially injure people, and generally cause trouble.

Read the rest of this entry »

Posted in Safety & Ergonomics|

OSHA, Whistleblowers, and Safety Bonuses

April 9, 2012
by

carrying cartons in a warehouse, wearing safety vest

OSHA has recently released a guide to safety incentives, disincentives, and reporting issues. It’s worth a quick read if you manage a manufacturing, warehousing, or industrial facility.

This document focuses on reporting/non-reporting workplace injury issues. OSHA says that “Reporting a work-related injury or illness is a core employee right, and retaliating against a worker for reporting an injury or illness is illegal discrimination under section 11(c).”  Of course, smart companies want to know if there are unsafe conditions or practices. But what if your safety rewards program is discouraging employees from reporting incidents, or even near-misses?

Read the rest of this entry »

Tags: , , , ,
Posted in Safety & Ergonomics|

How the Movies Get Material Handling Wrong

November 15, 2011
by

Mateial handling movies

If you are in the warehousing or material handling industry, you’ll find yourself identifying warehouse and handling equipment in movies or television shows quite often. Many of us have seen, for instance, the NFL graphics of a large distribution system used on Fox network for years. I’ve pointed out Hytrol conveyors in movies to my wife for years, to the point where she says it first when she sees it.

For fun, we have put together a list of the more famous scenes in entertainment history involving material handling equipment, and how it could have been done better.

Read the rest of this entry »

Tags: ,
Posted in Warehousing & Distribution|

Read our customer reviews