Three areas – picking, packing and returns – incur anywhere from 60% to 80% of labor costs in your typical distribution operation. 60% of the average pickers’ time is spent walking. Not picking, not packing, not checking for quality and accuracy – walking. This is an activity that cannot add value to your operation or to your customers, so you should strive to eliminate it whenever possible. Not only does it waste time, it makes people tired, and tends to cause a loss in focus and can increase error rates.
Read the rest of this entry »
Tags: order fulfillment, labor, product slotting, carton flow racks, ergonomics
Posted in Order Picking & Fulfillment|
When you are running an operation with lots of racking, it isn’t uncommon to have to replace an occasional upright or beam, or to add new bays onto an existing row. Sometimes you cannot avoid it, as the rack was purchased years ago, by someone else, or from a source you can’t even locate. It might be that you bought used rack and need to fill some gaps in, or it may be perfectly good, 10-year old rack that just needs some damaged components replaced.
This is done all the time, and although it isn’t an optimum situation for rack stability and safety, you can minimize the issues by following the following guidelines:
Read the rest of this entry »
Tags: Pallet Rack, warehouse safety, storage, industrial accident prevention, beams, uprights, warehousing, Material Handling
Posted in Pallet & Warehouse Racks|
A few months ago, we posted a Guide to Vertical Reciprocating Conveyors (you might find it useful if you’re looking at any application that moves a load up and down at least one level integrated with a shaft, mezzanine or other area). That guide includes the following questions, should be helpful as you move ahead with your project.
Read the rest of this entry »
Tags: Automation, warehousing, Material Handling, vertical lifts, vrc, mezzanine lifts
Posted in Lifting & Lift Systems|
Safety in warehouses tends to be greatly about the interactions between forklifts, pallet racks, people and stored products. This list of rack safety tips is part of our ongoing efforts to help warehouses operate safely and efficiently.
Read the rest of this entry »
Tags: industrial accident prevention, Material Handling, Pallet Rack, warehouse safety, storage
Posted in Pallet & Warehouse Racks|
Craig Chamberlain has an article over at the MHEDA Edge website that you need to read if you use pallet rack wire decking.
Here’s the money quote:
“Decking can, and often does, directly bear the total weight of the application’s load and transfers that load to the beams of the pallet rack. Regardless of the weight-bearing capacity of the rack’s beams, an improperly overrated deck can and will jeopardize the load-bearing capacity of the entire system and result in a failure.”
Read the rest of this entry »
Tags: Material Handling, Pallet Rack, OSHA, warehouse safety, facilities maintenance, wire rack decking
Posted in Pallet & Warehouse Racks|
With the growing popularity of automating the palletizing function, we arranged an interview with vonGAL, a leading manufacturer who has the largest installed base of palletizers in the country. Bobby Edmond is vonGAL’s Director of Applications, and has been in the business for 25 years. He has seen applications in a wide range of industries, and in companies large and small. I asked him if he would take time to share his thoughts, and answer a few questions of interest to those that might be considering palletizing for the first time.
Read the rest of this entry »
Tags: Material Handling, shipping, order fulfillment, Palletizers, palletizing, Factory Automation, warehousing
Posted in Automation, Labor & Efficiency|
In dynamic distribution environments, accurate, fast weighing, counting, and dimensioning systems are more important than ever. This is particularly true in 3PLs and other operations where needs often change. Getting it right, and getting it quickly has become increasingly more important. One way is to utilize the newer mobile weighing systems on the market today.
Read the rest of this entry »
Tags: warehousing, Material Handling, scales, industrial weighing systems, inventory accuracy
Posted in Warehousing & Distribution|
Pallet racks take a beating over time. They get loaded with exceptionally heavy pallets, by exceptionally powerful lift trucks over and over throughout the course of years. Chances are that if you have pallet rack in your warehouse, it’ll get hit at some point. When it does, inspecting (and generally replacing) it is your best course of action. But what about avoiding that hit, or its dangerous aftermaths in the first place?
Read the rest of this entry »
Tags: facilities maintenance, Material Handling, Pallet Rack, OSHA, warehouse safety
Posted in Pallet & Warehouse Racks|
As interest continues to grow in automated palletizing, let’s take a brief look at a few of the issues surrounding these applications.
Over the next couple of months, I’ll be providing a handful of blog postings relative to palletizers. We will begin with what is driving the growth in the use of these products, then a look at basic systems, cost estimates, what you can expect from a properly applied palletizer system, and then share specifics from a couple of actual implementations in distribution centers. If you are experienced in palletizer systems, you will likely be familiar with much of what is covered here. If you are new to palletizing, or considering your first system, hopefully, this information will help you understand what the issues are and how you can navigate them.
Read the rest of this entry »
Tags: Material Handling, shipping, order fulfillment, Palletizers, palletizing, ergonomics, Factory Automation, warehousing
Posted in Automation, Labor & Efficiency|
Walk into any order fulfillment operation, and you will see gravity flow rack.
The reason is obvious–it’s one of the best ways to pick orders utilizing first-in, first-out principles. It used to be that there was one kind of the stuff, the plastic-wheel tracks, but these days the choices are more diverse than ever. For the most part, these flow rack types act the same; they decline toward the picker and boxes or totes or even larger components flow toward him. They’re restocked from the rear and picked from the front onto a takeaway conveyor line, a cart, workstation, or another step in the process.
Read the rest of this entry »
Tags: warehousing, Material Handling, Hytrol, order fulfillment, Supply Chain, carton flow, gravity flow rack, distribution center, Unex, Keneco, Conveyor, picking systems
Posted in Order Picking & Fulfillment|
Read our customer reviews
